Westinghouse Wifi Tankless Water Heater Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This westinghouse wifi tankless water heater review covers the Westinghouse 24kW model, an electric unit designed for whole-house use. It delivers up to 5.55 GPM of hot water at 240V. The compact gray body measures 17.1 inches high by 13 inches wide. You get instant hot water without a tank. The unit connects to WiFi for remote control. This spec-focused look explains how these numbers affect your daily hot water supply and installation needs.
What stands out
- 24kW heating element provides up to 5.55 GPM flow rate
- 240V electric power requires three 40-amp breakers
- WiFi app and voice control with Alexa or Google Home
- Compact 17.1" H x 13" W x 4.3" D design
Who it fits
Good fit for
You should consider this unit if you need a whole-house solution for a small to medium home. The 24kW output supports simultaneous use in bathrooms and kitchens. It fits well in apartments, cabins, or offices where space is tight. The smart features suit users who want to adjust temperatures remotely. The 240V requirement means you need adequate electrical capacity, typically three 40-amp breakers.
Who should skip it
Skip this model if your home requires more than 5.55 GPM of simultaneous hot water. Large families with multiple showers running at once may find the flow rate insufficient. If you lack the necessary electrical infrastructure for three 40-amp breakers, installation will be difficult. This unit is electric only, so gas users must look elsewhere. The 240V specification is a hard constraint for compatibility.
Verdict: This heater offers solid whole-house performance for homes with adequate electrical capacity. Its smart features and compact size make it a practical choice for modern installations.
Key specs explained
Wattage: 24kW
This power rating determines how quickly the unit heats water as it flows through. A 24kW element provides robust heating capacity for whole-house applications. It allows the heater to maintain consistent temperatures even when multiple fixtures are running. You should compare this to lower-wattage models if you need higher flow rates during winter months when inlet water temperatures drop significantly.
Flow Rate: 5.55 GPM
Gallons per minute indicates the maximum volume of hot water the unit can supply. At 5.55 GPM, this model can simultaneously feed a shower and a kitchen sink without pressure loss. If your household has three or more bathrooms, this flow rate may suffice. Compare this figure against your total simultaneous demand to ensure you do not run out of hot water during peak usage times.
Voltage: 240V
This unit requires a dedicated 240-volt electrical circuit to operate. Standard household outlets provide 120V, so you must have proper wiring installed. The listing specifies the need for 100A current capacity using three 40-amp breakers and 8 AWG wire. You must verify your home’s electrical panel has the space and capacity for these upgrades before installation to ensure safe operation.
Dimensions: 17.1 x 13 x 4.3 inches
The compact footprint allows this unit to mount flush against a wall, saving valuable floor space. Its small depth makes it suitable for tight utility closets or under-sink installations. Compare these measurements with your available space to ensure it fits your planned location. The lightweight design at 17 pounds also simplifies mounting on standard wall studs without requiring specialized reinforcement.
Design and build specs
According to the listing, the Westinghouse 24kW unit measures 17.1 inches high by 13 inches wide and 4.3 inches deep. It weighs 17 pounds. The compact gray casing mounts flush against the wall. This small footprint takes up zero floor space. You can install it in tight utility closets or small bathrooms without crowding the area. The dimensions allow for easy placement in apartments or homes where space is limited.
The unit features 3/4-inch NPT water connections at the bottom. This standard fitting simplifies plumbing integration for most residential setups. The gray finish provides a neutral look that blends with typical utility room decor. You do not need to worry about matching bright colors or bulky exteriors. The design prioritizes a low profile and clean lines.
Smart controls are built into the body. You can adjust the temperature and monitor usage via a smartphone app or voice commands through Alexa and Google Home. This remote access means you can check the heater’s status without walking to the unit. The interface is integrated directly into the device, keeping the exterior simple. You get modern convenience without adding external remotes or complex displays. The build supports whole-house use while remaining easy to access for basic adjustments.
Setup and everyday use
Installing this unit requires specific electrical infrastructure. The 24kW rating draws up to 100A of current. You must use three 40-amp double-pole breakers. The wiring needs to be 8 AWG gauge. The water connections use standard 3/4-inch NPT fittings on the bottom. This setup ensures the heater receives stable power for its 240V operation. Once installed, daily use begins with water flow. The unit activates at a low starting flow rate of 0.79 GPM. This means even a small tap turn triggers heating. You get instant hot water without waiting. The maximum flow reaches 5.55 GPM. This capacity supports simultaneous use in a shower and a sink. You do not need to worry about temperature drops or cold shocks. The smart features add convenience. Built-in Wi-Fi lets you control the unit remotely. You can adjust the temperature setting via a mobile app. Voice commands through Alexa or Google Home are also supported. This integration fits easily into modern smart home setups. You can monitor usage and change settings from anywhere. The compact design keeps the unit out of the way. It mounts flush against the wall. The gray casing blends into utility spaces. You enjoy a continuous supply of hot water for whole-house needs. The system handles residential demands in bathrooms, kitchens, or offices. You get reliable performance without the bulk of a traditional tank.
Check Electrical And Plumbing Needs
Before you buy, verify your electrical panel has space for three separate 40-amp double-pole breakers. You must install 8 AWG gauge wire to handle the 100A current draw. This unit requires a 240V supply, so confirm your home’s voltage matches. Check that your plumbing uses standard 3/4-inch NPT connections for easy integration. The compact size fits most utility closets, but ensure you have enough clearance for maintenance access. Unlike gas models, this electric heater needs no venting, simplifying installation in interior rooms. However, it lacks the high BTU output of larger gas units, so it may struggle in very cold climates with high demand. Consider if your household’s simultaneous water usage exceeds 5.55 GPM. If you run multiple showers and sinks at once, you might need a higher capacity model. This unit suits apartments or smaller homes with moderate hot water needs. It integrates well with smart home ecosystems via Wi-Fi, allowing remote temperature adjustments. Ensure your router covers the installation area for reliable app control. Regularly inspect connections for leaks, as high current draw can stress fittings over time. This option fits buyers seeking easy electric installation without gas line modifications.
Check before you buy
- Confirm panel supports three 40-amp double-pole breakers
- Verify 240V supply and 8 AWG wiring availability
- Ensure plumbing uses 3/4-inch NPT connections
- Check if your home fits within the 5.55 GPM limit
The product at a glance
Westinghouse 24kW WiFi Tankless Water Heater
Best for: Whole-house hot water with smart features
- Fuel Type
- Electric
- Flow Rate
- Max 5.55 GPM
- Wattage
- 24 kW
- Voltage
- 240V
- Certification
- ETL
- Dimensions
- 17" x 13" x 4.3"
View on Amazon: Westinghouse 24kW WiFi Tankless Water Heater Affiliate link
This 24kW electric unit delivers up to 5.55 GPM of hot water at 240V. It supports simultaneous use in showers and sinks. The device includes WiFi for remote temperature control via app or voice commands. Its compact 17 x 13 x 4.3 inch design mounts flush to the wall. It requires three 40-amp breakers and 8 AWG wire for proper installation.
Pros
- Provides up to 5.55 GPM flow rate
- Includes WiFi for app and voice control
- Compact dimensions mount flush to the wall
- Low starting flow rate of 0.79 GPM
Cons
- Requires three separate 40-amp breakers
- Needs 8 AWG wiring for installation
- Weighs 17 pounds
Good fit if
- You need whole-house hot water for multiple fixtures
- You want remote temperature adjustments via WiFi
- You have the electrical capacity for three breakers
Skip if
- You cannot install three 40-amp double-pole breakers
- You lack space for 8 AWG wiring
- You prefer a single-circuit installation
Verdict: Westinghouse 24kW Electric Tankless Heater fits homes that can support its high electrical demand and want smart control. It suits those needing simultaneous hot water for multiple bathrooms.
Specifications side by side
| Spec | Westinghouse 24kW WiFi Tankless Water Heater |
|---|---|
| Fuel Type | Electric |
| Flow Rate | Max 5.55 GPM |
| Wattage | 24 kW |
| Voltage | 240V |
| Certification | ETL |
| Dimensions | 17" x 13" x 4.3" |
| Use | Whole House |
| Features | WiFi |
| Weight | 17 pounds |
| Size | L-24 |
| Color | Gray 24 |
| Model | WET-24K-G |
Frequently asked questions
Does the Westinghouse 24kW tankless heater work with smart home systems?
Yes, this model includes built-in WiFi connectivity. You can control the unit remotely using a dedicated app. This feature allows you to monitor water temperature and adjust settings from your phone. It provides convenience for managing hot water usage without being near the installation site.
What electrical requirements are needed for this unit?
This 24kW electric heater requires a 240V power supply. It draws up to 100 amps of current. You must install three separate 40-amp double-pole circuit breakers. The wiring must be 8 AWG gauge to handle the high electrical load safely and effectively.
How much space does the Westinghouse water heater take up?
The unit measures 17.1 inches in height and 13 inches in width. It weighs 17 pounds and mounts flush against the wall. The compact gray design saves floor space. Its small footprint makes it suitable for closets or utility rooms with limited area.
Can this heater supply hot water for multiple bathrooms?
Yes, it is designed for whole-house use. The 24kW power rating supports simultaneous hot water delivery. It can maintain consistent temperatures for multiple fixtures running at once. This makes it suitable for homes with two or more bathrooms requiring steady hot water flow.
What type of water connections does this model use?
The unit features standard 3/4-inch NPT fittings for water connections. These are common sizes for residential plumbing systems. You can connect it to existing hot and cold water lines using standard adapters. Ensure your plumbing matches this size for proper installation.
Is the Westinghouse 24kW heater suitable for small apartments?
While compact, the 24kW model is best for whole-house applications. It delivers up to 5.55 GPM, which may exceed small apartment needs. The high electrical demand of 100 amps also requires significant panel space. Smaller units might be more appropriate for limited usage scenarios.