Westinghouse vs WINTEMP Tankless Water Heaters: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When comparing the westinghouse vs WINTEMP tankless water heater, you face two electric options with distinct performance profiles. Both units offer whole-house hot water with built-in WiFi for remote temperature control. The primary difference lies in power capacity. The Westinghouse model provides 24kW of heating power, while the WINTEMP unit delivers 36kW. This wattage gap directly impacts flow rates and electrical requirements, helping you decide which fits your home’s infrastructure.
Key differences
| Aspect | Westinghouse 24kW WiFi Tankless Water Heater | WINTEMP 36kW Electric Tankless Water Heater |
|---|---|---|
| Wattage | 24 kW | 36 kW |
| Max Flow Rate | 5.55 GPM | 8.7 GPM |
| Dimensions (H x W x D) | 17.1 x 13 x 4.3 inches | 21.1 x 13.7 x 5.2 inches |
| Weight | 17 pounds | 36.1 pounds |
| Circuit Breakers Required | 3 x 40A DP | 4 x 40A DP |
| Certification | Not listed | ETL Certified |
Which one should you choose?
Choose Westinghouse 24kW WiFi Tankless Water Heater if
- You need a compact unit that fits smaller utility spaces due to its smaller footprint and lighter weight.
- Your home has a standard electrical panel that supports a 100A dedicated circuit rather than a 150A load.
- You primarily need hot water for one or two bathrooms in a moderate climate.
Choose WINTEMP 36kW Electric Tankless Water Heater if
- You require higher flow rates to support multiple simultaneous showers in a home with three or more bathrooms.
- Your electrical service can handle a 300A main panel and you can install four 40A double-pole breakers.
- You prefer a unit with explicit ETL certification and advanced self-modulating technology for energy optimization.
Verdict: The Westinghouse 24kW model suits smaller households or apartments with limited electrical capacity and space. The WINTEMP 36kW unit is better for larger homes needing higher flow rates and robust electrical infrastructure. Choose based on your available amperage and hot water demand.
Capacity and Flow Rate Comparison
Maximum Flow Rate
The WINTEMP WN36 delivers a maximum flow rate of 8.7 GPM, while the Westinghouse WET-24K-G provides 5.55 GPM. This significant difference affects how many fixtures you can run simultaneously. The WINTEMP unit supports higher demand scenarios, such as running a shower and a sink in a larger home. Westinghouse starts flowing at 0.79 GPM, which is quite low. This allows the Westinghouse unit to activate even with minimal water usage, potentially offering better efficiency for single-fixture use. However, for whole-house coverage in larger households, the WINTEMP capacity is superior. The higher flow rate ensures consistent pressure and temperature during peak usage times.
Heating Power
Wattage determines how much energy the unit uses to heat water. The WINTEMP WN36 operates at 36kW, whereas the Westinghouse model is rated at 24kW. This 12kW difference means the WINTEMP can handle colder incoming water temperatures more effectively. If you live in a region with very cold groundwater, the higher wattage of the WINTEMP will maintain hotter output water. The Westinghouse 24kW unit is sufficient for moderate climates or smaller homes. Both units require 240V power, but the electrical infrastructure needs differ. The WINTEMP requires four 40-amp breakers, while Westinghouse needs three. Higher wattage generally means higher potential energy consumption when running at full capacity.
Physical Dimensions
Size matters for installation locations with limited space. The Westinghouse unit measures 17.1 inches in height, 13 inches in width, and 4.3 inches in depth. The WINTEMP WN36 is taller at 21.1 inches, slightly wider at 13.7 inches, and deeper at 5.2 inches. The Westinghouse model is more compact vertically, making it easier to fit in tighter vertical spaces like narrow closets or under counters. The WINTEMP is larger overall, which may require more clearance for maintenance access. Both units are wall-mounted and use 3/4-inch NPT connections. If your installation spot is constrained vertically, the Westinghouse design offers a clear advantage in fit.
Electrical Requirements
Both heaters run on 240V electricity, but the amperage demands vary significantly. The Westinghouse unit draws 100A and requires three 40-amp double-pole breakers with 8 AWG wire. The WINTEMP WN36 draws up to 150A and requires four 40-amp double-pole breakers with 8/2 AWG cables. The WINTEMP places a heavier load on your home's electrical system. You must verify that your household service can handle the extra capacity, with a recommendation for a 300A service for the WINTEMP. The Westinghouse installation is less demanding on your electrical panel. If your home has older or limited electrical infrastructure, the Westinghouse unit is the easier and safer choice to install.
Safety Certifications
Safety standards are critical for high-power electric appliances. The WINTEMP WN36 is explicitly ETL certified, which indicates it has been tested against specific safety standards by a Nationally Recognized Testing Laboratory. This certification provides assurance of reliable performance and safety compliance. The Westinghouse product data does not list specific safety certifications like ETL or UL. While both units include features like overheat protection, the lack of stated certification for the Westinghouse model makes it harder to verify its compliance with national safety codes. For buyers who prioritize documented safety testing and third-party verification, the WINTEMP certification offers a distinct advantage.
Which tankless heater fits your home
You have a smaller home or apartment
The Westinghouse unit offers 24kW of power, which is sufficient for whole-house needs in smaller residences. Its compact dimensions of 17 x 13 x 4.3 inches take up less wall space. You get WiFi control and a 5.55 GPM flow rate that handles simultaneous shower and sink use without overwhelming your electrical system.
You need high flow for multiple bathrooms
The WINTEMP WN36 delivers 36kW and up to 8.7 GPM, supporting higher demand scenarios. It is designed for homes with three to five bathrooms. You get stable water temperature through self-modulating technology. The unit requires a robust electrical setup with four 40A breakers to handle the increased power draw safely.
You want safety certifications and warranty
WINTEMP includes ETL certification for reliable performance and safety. You get specific protections against leakage, overheat, and dry-fire conditions. The brand also provides a two-year replacement warranty. This added layer of verification and support offers peace of mind, ensuring the unit meets established safety standards for long-term residential use.
The products compared
Westinghouse 24kW WiFi Tankless Water Heater
Best for: whole-house hot water with smart app control
- Fuel Type
- Electric
- Flow Rate
- Max 5.55 GPM
- Wattage
- 24 kW
- Voltage
- 240V
- Certification
- ETL
- Dimensions
- 17" x 13" x 4.3"
View on Amazon: Westinghouse 24kW WiFi Tankless Water Heater Affiliate link
This 24kW electric tankless water heater delivers up to 5.55 GPM of hot water at 240V. Its compact 17.1-inch height and 4.3-inch depth mount flush to the wall. You get smart WiFi control for remote temperature adjustments. It requires a 100A electrical setup with three 40-amp breakers. This unit suits whole-house needs in apartments or homes where space is limited.
Pros
- High flow rate of 5.55 GPM for simultaneous use
- Compact 4.3-inch depth mounts flush against the wall
- Smart WiFi allows remote temperature and usage monitoring
- Low starting flow rate of 0.79 GPM
Cons
- Requires a substantial 100A electrical circuit with three breakers
- Heavier build at 17 pounds compared to smaller units
- Limited to 240V input, restricting installation flexibility
Good fit if
- You need a compact unit that mounts flush to the wall
- You want to control water temperature via a smartphone app
- You have the electrical capacity for a 100A circuit
Skip if
- You only have a standard 40A or 60A electrical panel
- You need a unit for a single sink only
- You prefer a gas-powered heating system
Verdict: Westinghouse 24kW WiFi Electric Tankless Heater fits homes with robust electrical infrastructure that value space-saving design and remote app control.
WINTEMP 36kW Electric Tankless Water Heater
Best for: Whole-house hot water with WiFi control
- Fuel Type
- Electric
- Flow Rate
- Up to 8.7 GPM
- Wattage
- 36 kW
- Voltage
- 240V
- Certification
- ETL
- Dimensions
- 21.5 x 13.7 x 5.2 inches
View on Amazon: WINTEMP 36kW Electric Tankless Water Heater Affiliate link
The WINTEMP WN36 is a 36kW electric tankless water heater designed for whole-house use. It delivers up to 8.7 GPM at 240V. Built-in WiFi lets you control temperature from your smartphone. The unit measures 13.7 x 21.5 x 5.2 inches. It requires four 40A breakers and 8/2 AWG cables. This model suits homes with three to five bathrooms in mild climates.
Pros
- 36kW power output for high flow rates
- Built-in WiFi for remote smartphone control
- Self-modulating technology for stable water temperature
- ETL certified for safety reliability
Cons
- Requires four 40A double-pole circuit breakers
- Needs 8/2 AWG cables for installation
- Heavy at 36.1 pounds
Good fit if
- You have a 300A electrical service
- You want WiFi temperature control
- You need hot water for multiple bathrooms
Skip if
- You have limited electrical capacity
- You cannot install four separate breakers
- You live in a very cold climate
Verdict: WINTEMP 36kW Electric Tankless Water Heater fits homes with strong electrical systems and WiFi needs. It provides consistent hot water for multiple bathrooms.
Specifications side by side
| Spec | Westinghouse 24kW WiFi Tankless Water Heater | WINTEMP 36kW Electric Tankless Water Heater |
|---|---|---|
| Fuel Type | Electric | Electric |
| Flow Rate | Max 5.55 GPM | Up to 8.7 GPM |
| Wattage | 24 kW | 36 kW |
| Voltage | 240V | 240V |
| Certification | ETL | ETL |
| Dimensions | 17" x 13" x 4.3" | 21.5 x 13.7 x 5.2 inches |
| Use | Whole House | Whole House |
| Features | WiFi | WiFi |
| Weight | 17 pounds | 36.1 pounds |
| Size | L-24 | 36kW |
| Color | Gray 24 | Gray |
| Model | WET-24K-G | WN36 |
Frequently asked questions
Is Westinghouse or WINTEMP better for whole-house use?
WINTEMP is better for larger homes with high hot water demand. Its 36kW output supports up to 8.7 GPM, allowing multiple showers to run at once. Westinghouse offers 24kW and 5.55 GPM, which suits smaller households or single-bathroom setups. Choose WINTEMP for higher flow capacity.
Does WINTEMP have WiFi control like Westinghouse?
Yes, both brands include built-in WiFi for remote management. You can adjust temperatures and monitor usage via smartphone apps on either unit. This feature allows you to control your hot water system from anywhere, ensuring convenience and energy efficiency for both the WINTEMP 36kW and Westinghouse 24kW models.
Which tankless heater is smaller in size?
The Westinghouse 24kW unit is more compact. It measures 13 by 17.1 by 13 inches and weighs just 17 pounds. The WINTEMP 36kW model is larger at 13.7 by 21.1 by 13.7 inches and weighs 36.1 pounds. If wall space is limited, the Westinghouse unit fits better.
Can I install these electric heaters myself?
Both units require 240V electrical connections. The WINTEMP 36kW model demands a stronger electrical infrastructure due to its higher wattage. The Westinghouse 24kW unit is less demanding. You should consult a licensed electrician to ensure your home’s panel can handle the load, especially for the higher-capacity WINTEMP unit.
What is the difference between 24kW and 36kW?
The wattage difference determines how much hot water you can generate simultaneously. The 36kW WINTEMP unit produces more heat, supporting higher flow rates for multiple bathrooms. The 24kW Westinghouse unit provides adequate hot water for smaller homes or single-point uses. Higher kilowattage means faster heating and greater volume.
Are both units suitable for whole-house applications?
Yes, both are rated for whole-house use. The WINTEMP 36kW is ideal for homes with multiple bathrooms running concurrently. The Westinghouse 24kW is suitable for smaller whole-house needs or apartments. Your choice depends on your household size and peak hot water usage patterns throughout the day.