RVPart Pro Tankless Water Heater RVs Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This rvpart pro tankless water heater RVs review covers the RVPart Pro GT60A, a propane-powered unit designed for recreational vehicles. It delivers 60,000 BTU/hr of heating power with a maximum flow rate of 3.5 GPM. The system runs on 12V DC electricity, making it compatible with standard RV electrical systems. It is a compact, drop-in replacement for older Suburban and Atwood models. The unit measures 19.1 x 17.6 x 17.6 inches and fits standard 15x15, 15x18, or 18x18 inch openings. This spec-focused look explains how these numbers affect your daily hot water supply.
What stands out
- 60,000 BTU/hr propane heating system for continuous hot water
- 12V DC voltage operation suitable for standard RV electrical systems
- 3.5 GPM flow rate for stable shower and sink performance
- Built-in 150 PSI pressure reducing valve for added safety
- CSA certification with multiple protection features including freeze and over-temperature safeguards
Who it fits
Good fit for
You should choose this heater if you need a direct replacement for existing Suburban or Atwood units in your camper or travel trailer. The 12V DC requirement ensures it works with your RV's standard battery system without needing complex electrical upgrades. Its compact dimensions allow for easy installation into standard openings. If you want continuous hot water for showers and dishwashing without waiting for a tank to refill, this propane-powered on-demand system fits your setup perfectly.
Who should skip it
You should look elsewhere if your RV does not operate on 12V DC power, as this unit requires that specific voltage to function. It is designed strictly for propane fuel, so if you prefer natural gas or electric heating, this model is not suitable. Additionally, if you need a unit with a digital display or remote control features, this data does not mention those amenities. This is a straightforward mechanical unit focused on basic heating performance rather than smart connectivity or advanced user interfaces.
Verdict: The RVPart Pro GT60A offers reliable, on-demand hot water for RVs with standard 12V DC systems. Its compact design and safety features make it a practical choice for replacing older tank heaters.
Key specs explained for this unit
60,000 BTU/hr
This heating capacity determines how quickly the water warms up. You get a stable hot water flow for daily tasks like showering or washing dishes. Higher BTU ratings generally mean faster recovery and better performance when multiple outlets are used. This level of power suits most standard RV needs without excessive energy waste.
3.5 GPM
Gallons per minute indicates the maximum volume of hot water delivered. A 3.5 GPM rate supports comfortable showers and sink use. This flow rate is sufficient for single-station RV setups. If you plan to run two fixtures simultaneously, you may experience reduced pressure or temperature drops. Check your RV plumbing limits before relying on this maximum.
12V DC
This voltage requirement means the unit runs directly off your RV’s battery system. It eliminates the need for complex inverter setups or shore power. You can use this heater while boondocking or parked without external electricity. Ensure your RV’s electrical system can handle the startup load. This feature is essential for off-grid camping scenarios.
Propane
Propane is the fuel source for this tankless heater. It provides reliable heat independent of electrical grid connections. Propane is widely available at campsites and RV parks. It burns cleanly and efficiently for on-demand heating. Verify your RV has a compatible propane supply line and regulator. This fuel type is standard for most recreational vehicle applications.
CSA
CSA certification indicates the unit meets specific safety and performance standards. This mark ensures the heater has been tested for safe operation in RV environments. It provides assurance that electrical and gas components meet regulatory requirements. Look for this certification when purchasing to ensure compliance. It helps prevent hazards like gas leaks or electrical faults during travel.
Design and build details
The listing describes the unit as having a silver finish. It measures 19.1 inches in height, with a width and length of 17.6 inches. These dimensions allow it to fit into standard RV openings. The manufacturer states it replaces units from Suburban and Atwood. It is designed for doors measuring 15x15, 15x18, or 18x18 inches, with a required opening of 13x13 inches. This drop-in design simplifies installation in tight camper spaces.
According to the listing, the build includes a built-in pressure reducing valve rated for 150 PSI. This component manages water pressure internally, so you do not need to buy separate parts. The unit also features a forced exhaust fan and auto shut-off mechanisms. These elements contribute to stable combustion and safety during travel. The listing notes multiple protection features, including flame failure, over-temperature, and anti-freeze safeguards.
The compact and lightweight construction is intended for quick mounting. You can secure it with screws using the provided manual instructions. The CSA certification indicates it meets specific safety standards for gas appliances. The 12V DC power requirement aligns with standard RV electrical systems. This design choice ensures compatibility with your vehicle's battery or converter without needing external power sources. The overall layout prioritizes fitting into existing RV footprints while delivering on-demand hot water.
Installation and Daily Operation
This unit is designed as a drop-in replacement for standard RV water heaters. It fits doors measuring 15x15 inches, 15x18 inches, or 18x18 inches, with a required opening of 13x13 inches. You can install it yourself by positioning the heater in the designated mounting location. Mark the drilling points according to the manual, then secure the unit with screws. The listing notes it replaces Suburban and Atwood models, which simplifies the swap for existing RV owners.
Before starting, verify that your recreational vehicle operates on 12V DC power. The system draws electricity from your RV’s standard low-voltage circuit. Once installed, the unit provides on-demand hot water. You get a stable flow of up to 3.5 gallons per minute. This supports showers, dishwashing, and other daily tasks without waiting for a tank to reheat.
The heater includes a built-in pressure reducing valve rated for 150 PSI. This component manages water pressure internally, removing the need for external purchases. Safety features include flame failure protection, over-temperature protection, and anti-freeze capabilities. A forced exhaust fan ensures stable combustion and venting. The unit is CSA-certified for safety standards. You can rely on these specs for consistent performance during travel. The 24-month service support offers additional assurance for long-term RV use.
Before you buy this heater
You must verify your RV uses 12V DC power. The listing specifies this requirement clearly. If your system runs on 120V AC, this unit will not work. Check your electrical panel or existing heater label to confirm voltage compatibility. You also need to measure your current heater door and opening. The unit fits 15x15, 15x18, or 18x18 inch doors with a 13x13 inch opening. Ensure your propane supply lines match the connection type. Upkeep involves checking the exhaust fan and cleaning the burner annually. This model sits alongside other propane options in our 1 product guide. It suits travelers who need continuous hot water without tank storage. Its compact size saves space in tight RV compartments. Consider your typical water usage when comparing flow rates. This unit delivers 3.5 GPM, which supports basic showering needs.
Check before you buy
- Verify your RV has a 12V DC electrical system.
- Measure your existing heater door and mounting opening size.
- Confirm propane tank pressure matches unit requirements.
- Check if you need a pressure reducing valve.
The product at a glance
RVPart Pro 60K BTU 12V DC Tankless Heater
Best for: RV owners replacing standard Suburban or Atwood units
- Fuel Type
- Propane
- Flow Rate
- Up to 3.5 GPM
- BTU
- 60,000 BTU
- Voltage
- 12V DC
- Certification
- CSA
- Dimensions
- 19.1 x 17.6 x 17.6 inches
View on Amazon: RVPart Pro 60K BTU 12V DC Tankless Heater Affiliate link
This RVPart Pro unit delivers 60,000 BTU/hr of heating power at 3.5 GPM using propane and 12V DC. It is designed as a drop-in replacement for Suburban and Atwood models, fitting standard 15x15, 15x18, or 18x18 inch openings. The silver GT60A model includes a built-in 150 PSI pressure reducing valve and CSA certification. It suits RV owners seeking a direct upgrade for their existing water heater space.
Pros
- 60,000 BTU/hr propane heating system
- 3.5 GPM continuous hot water flow
- Built-in 150 PSI pressure reducing valve
- CSA certified for safety
- Fits standard 15x15 to 18x18 inch RV openings
Cons
- 19.1 x 17.6 x 17.6 inch footprint may not fit all tight spaces
- Propane fuel requires tank management
- No digital display or remote control mentioned
Good fit if
- You need a direct replacement for Suburban or Atwood heaters
- Your RV uses 12V DC electrical systems
- You want a CSA-certified unit with built-in pressure regulation
Skip if
- You require electric-only operation without propane
- Your RV opening is smaller than 13x13 inches
- You need smart home integration or app control
Verdict: RVPart Pro 60K BTU Propane RV Heater fits RV owners who need a straightforward, high-output propane replacement for standard Suburban or Atwood units. It offers reliable heating and safety certifications for travelers who prioritize direct installation over smart features.
Specifications side by side
| Spec | RVPart Pro 60K BTU 12V DC Tankless Heater |
|---|---|
| Fuel Type | Propane |
| Flow Rate | Up to 3.5 GPM |
| BTU | 60,000 BTU |
| Voltage | 12V DC |
| Certification | CSA |
| Dimensions | 19.1 x 17.6 x 17.6 inches |
| Use | RV |
| Color | Silver |
| Model | GT60A |
Frequently asked questions
Is the RVPart Pro GT60A compatible with standard RV water heater openings?
Yes, this unit is designed as a direct replacement for common RV models. It fits doors measuring 15x15 inches, 15x18 inches, or 18x18 inches. The required cutout opening is 13x13 inches, allowing for straightforward installation in most recreational vehicles.
What electrical voltage does the RVPart Pro tankless heater require?
The system operates on 12V DC electricity. You must verify your RV uses this voltage before purchasing. If your vehicle runs on 120V AC, this specific model will not function correctly. Check your existing electrical panel to confirm compatibility.
Does the RVPart Pro GT60A use propane or natural gas?
This heater runs exclusively on propane fuel. It is not compatible with natural gas lines. The 60,000 BTU/hr output provides reliable heating for daily tasks like showering. Ensure you have adequate propane supply for your travel needs.
How large is the RVPart Pro water heater physically?
The unit measures 19.1 inches in height, with a width and length of 17.6 inches. It features a silver finish. These dimensions are engineered to fit into standard RV openings, making it a suitable drop-in replacement for older units.
Can I install the RVPart Pro heater myself?
Yes, the design allows for direct installation by the user. It is built to replace standard Suburban or Atwood units without complex modifications. Position the heater in the existing opening and connect the propane and 12V DC lines according to the manual.
Who is the best fit for the RVPart Pro tankless heater?
This model is ideal for RV owners replacing standard Suburban or Atwood units. It suits travelers who prioritize high output and safety certifications over smart features. If you need a straightforward, reliable propane replacement, this unit meets those requirements.
