GASLAND vs VELPAX Tankless Water Heaters: Which Brand Fits You?
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the GASLAND vs VELPAX tankless water heater options, you face a choice between portable convenience and whole-home capacity. Both units run on propane and feature electronic ignition for reliable startup. The main difference lies in their intended use and power. GASLAND offers a compact, outdoor-ready unit for low-flow needs. VELPAX provides a higher-output indoor model for simultaneous use. Your decision depends on where you install the unit and how much hot water you need.
Key differences
| Aspect | GASLAND 1.58 GPM Portable Propane Water Heater | VELPAX 4.74 GPM Indoor Propane Water Heater |
|---|---|---|
| Flow Rate | 1.58 GPM | 4.74 GPM |
| BTU Output | 41,000 BTU/hr | 68,000 BTU/hr |
| Installation Location | Outdoor | Indoor |
| Max Temperature Rise | 109.4°F | 149°F |
| Body Material | Not listed | Stainless steel |
Which one should you choose?
Choose GASLAND 1.58 GPM Portable Propane Water Heater if
- You need a portable unit for outdoor activities like camping or RVing.
- You require a low-flow solution for a single sink or shower.
- You want a lightweight heater that runs on a standard 20 lb propane tank.
Choose VELPAX 4.74 GPM Indoor Propane Water Heater if
- You need hot water for multiple fixtures, such as a bathroom and kitchen simultaneously.
- You are installing the unit indoors and require proper venting.
- You want a higher temperature rise for colder incoming water supplies.
Verdict: The GASLAND unit is the practical choice for portable, low-demand outdoor applications. The VELPAX model is better suited for indoor residential use where higher flow and simultaneous use are required. Select based on your installation location and daily hot water volume needs.
GASLAND vs VELPAX: Key Specs
Flow rate capacity
The VELPAX unit delivers 4.74 gallons per minute, while the GASLAND model provides 1.58 gallons per minute. This significant difference means the VELPAX can supply hot water to multiple fixtures simultaneously, such as a bathroom shower and a kitchen sink. The GASLAND unit is better suited for single-point use, like a small outdoor shower or a single faucet. If you need to run water for two or more people at once, the higher flow rate of the VELPAX is essential. The GASLAND flow rate is sufficient for basic, individual tasks but will struggle to maintain pressure if multiple outlets are open.
Heating power
VELPAX offers a maximum output of 68,000 BTU per hour. GASLAND provides 41,000 BTU per hour. Higher BTU output allows the VELPAX to heat water more rapidly and maintain temperature stability under higher flow demands. This makes the VELPAX more effective in colder climates or for users who prefer hotter water temperatures. The GASLAND heater is adequate for moderate temperature rises but may not reach the same peak temperatures as the VELPAX when the flow rate is increased. For consistent hot water delivery during peak usage times, the higher thermal output of the VELPAX is a clear advantage.
Installation location
The GASLAND heater is designed for outdoor use only, as noted in its specifications. It is splash-proof but should not be exposed to prolonged rain. The VELPAX unit is explicitly designed for indoor installation. It includes a 2.5-inch horizontal vent pipe and requires proper ventilation and a smoke exhaust pipe. This distinction is critical for safety and compliance. If you plan to install the unit inside a cabin or home, the VELPAX is the only viable option. The GASLAND unit must remain outside, limiting its placement to patios, campsites, or utility areas.
Temperature control range
The VELPAX unit allows you to adjust the temperature between 95°F and 149°F. This wide range gives you precise control for various needs, from gentle washing to high-temperature cleaning. The GASLAND unit features a temperature rise of up to 109.4°F, but its specific adjustable output range is not detailed in the provided data. The VELPAX LED display lets you set exact temperatures, ensuring you do not get water that is too hot or cold. This level of customization is beneficial for sensitive skin or specific household requirements.
Physical dimensions
The GASLAND heater measures 17.3 x 11.8 x 11.8 inches, making it more compact and portable. The VELPAX unit is larger, measuring 21.7 x 13.8 x 13.8 inches. The smaller footprint of the GASLAND model makes it easier to store or transport for camping, RVing, or hunting trips. The VELPAX is bulkier and better suited for permanent indoor mounting where space is less of a constraint. If portability is a priority, the GASLAND design is more convenient. For fixed indoor installations, the size difference is less critical.
Choose the Right Propane Heater
Outdoor enthusiasts needing portable hot water
The GASLAND model fits your mobile lifestyle. It runs on a standard 20 lb propane tank and starts with low water pressure. Its compact dimensions allow easy transport for camping or RV trips. The LED display helps you monitor temperature while on the go, ensuring comfort wherever you set up camp.
Homeowners needing high capacity for multiple fixtures
The VELPAX unit delivers 4.74 GPM, supporting simultaneous use in bathrooms and kitchens. Its 68,000 BTU output and stainless steel body provide durable, steady performance. The indoor design includes a vent pipe for safe installation. You get precise temperature control and efficient energy use for consistent hot water supply throughout your home.
Users in cabins or small apartments
This indoor heater saves space compared to traditional tanks. The VELPAX model fits well in small cabins or apartments with its compact footprint. It offers reliable constant temperature control and safety features like anti-freeze protection. The included fittings simplify installation, making it a practical choice for permanent setups in remote or limited spaces.
The products compared
GASLAND 1.58 GPM Portable Propane Water Heater
Best for: camping, RVs, and outdoor showers
- Fuel Type
- Propane
- Flow Rate
- 1.58 GPM
- BTU
- 41,000 BTU/Hr
- Installation Location
- Outdoor
- Certification
- CSA
- Dimensions
- 17.3 x 11.8 x 11.8 inches
View on Amazon: GASLAND 1.58 GPM Portable Propane Water Heater Affiliate link
The GASLAND BE158R is a portable propane tankless water heater designed for outdoor or off-grid use. It delivers 1.58 GPM with a maximum output of 41,000 BTU/hr. This unit runs on a standard 20 lb tank and starts with just 3.6 PSI of water pressure. It features an LED display and CSA certification for safety. You will find this model suitable for RVs, cabins, or camping trips where space is limited.
Pros
- Produces 1.58 gallons of hot water per minute
- CSA certified for safety standards
- Starts with low water pressure of 3.6 PSI
- Includes LED digital display for temperature monitoring
Cons
- Low flow rate of 1.58 GPM limits simultaneous use
- Requires two D-cell batteries for electronic ignition
- Designed for outdoor use and is not splash-proof in heavy rain
Good fit if
- You need a compact heater for RV or camping trips
- You require a unit that operates on a standard 20 lb propane tank
- You have low water pressure at your installation site
Skip if
- You need hot water for multiple showers at once
- You want an indoor-only installation without ventilation
- You prefer a unit with higher flow rates for whole-house use
Verdict: GASLAND BE158R 1.58 GPM Propane Heater is a practical option for campers and RVers who need reliable hot water on the go. It fits users who prioritize portability and low-pressure compatibility over high-volume output.
VELPAX 4.74 GPM Indoor Propane Water Heater
Best for: indoor propane systems with low water pressure
- Fuel Type
- Propane
- Flow Rate
- 4.74 GPM
- BTU
- 68,000 BTU/hr
- Installation Location
- Indoor
- Temperature Control
- 95°F to 149°F
- Dimensions
- 21.7 x 13.8 x 13.8 inches
View on Amazon: VELPAX 4.74 GPM Indoor Propane Water Heater Affiliate link
The VELPAX 18L delivers 4.74 GPM of hot water at 68,000 BTU/hr. It uses propane and is designed for indoor installation. The unit features a stainless steel body and an oxygen-free copper water tank. You can adjust the temperature between 95°F and 149°F via an LED display. It operates on just 3.6 PSI of water pressure, making it suitable for low-pressure systems.
Pros
- High flow rate of 4.74 GPM
- 68,000 BTU/hr heating power
- LED digital temperature display
- Stainless steel and copper construction
- Works with low water pressure (3.6 PSI)
Cons
- Indoor installation only
- Requires 2.5-inch horizontal vent pipe
- Propane fuel type limits placement options
Good fit if
- You need high flow for multiple fixtures
- You have low water pressure
- You are installing in an indoor space with proper venting
Skip if
- You require outdoor installation
- You use natural gas instead of propane
- You need a compact unit for tight spaces
Verdict: The VELPAX 18L Propane Tankless Heater offers strong performance for indoor use with its 4.74 GPM flow and low-pressure operation. It is a solid choice for homes needing reliable hot water for two to three points simultaneously.
Specifications side by side
| Spec | GASLAND 1.58 GPM Portable Propane Water Heater | VELPAX 4.74 GPM Indoor Propane Water Heater |
|---|---|---|
| Fuel Type | Propane | Propane |
| Flow Rate | 1.58 GPM | 4.74 GPM |
| BTU | 41,000 BTU/Hr | 68,000 BTU/hr |
| Installation Location | Outdoor | Indoor |
| Temperature Control | not stated | 95°F to 149°F |
| Certification | CSA | not stated |
| Dimensions | 17.3 x 11.8 x 11.8 inches | 21.7 x 13.8 x 13.8 inches |
| Features | Digital Display, Overheat Protection | not stated |
| Size | 1.58 GPM | 18L |
| Color | Red | White |
| Model | BE158R | HWRSQ-18L-001 |
Frequently asked questions
Can the GASLAND heater be used indoors?
No. The GASLAND BE158R is designed for outdoor use only. Its verdict highlights suitability for camping, RVs, and outdoor showers. Indoor propane units like the VELPAX model include specific ventilation and safety features that portable outdoor heaters lack. Using it inside poses serious carbon monoxide risks.
Does the VELPAX heater work with low water pressure?
Yes. The VELPAX 18L model is built for indoor propane systems with low water pressure. This feature allows it to operate effectively in homes where water flow is typically weak. It ensures consistent hot water delivery for two to three fixtures simultaneously without requiring high incoming pressure.
What is the difference in size between the two units?
The GASLAND unit is smaller and portable. It measures 11.8 inches wide by 17.3 inches high. The VELPAX indoor heater is larger, measuring 13.8 inches wide by 21.7 inches high. The GASLAND design prioritizes transportability for RVs, while the VELPAX fits standard indoor mounting spaces.
Can the GASLAND heater supply hot water for a full shower?
It depends on your needs. The GASLAND model has a flow rate of 1.58 GPM. This is sufficient for a single outdoor shower or hand washing. It is not designed for high-volume output. If you need simultaneous hot water for multiple fixtures, this low flow rate may be limiting.
Is the VELPAX heater suitable for RVs?
It is less ideal than the GASLAND option. The VELPAX unit is designed for indoor installation in homes. Its larger size and higher capacity make it better for stationary residential use. The GASLAND heater is specifically recommended for RVs due to its compact size and portable nature.
What fuel do both tankless heaters use?
Both units run on propane. The GASLAND BE158R uses propane for outdoor portability. The VELPAX 18L also uses propane for indoor heating. This common fuel type means you can use standard propane tanks for both, though the GASLAND model is optimized for easy connection on the go.
How many fixtures can the VELPAX heater support at once?
It supports two to three points simultaneously. With a flow rate of 4.74 GPM, the VELPAX heater provides strong performance for indoor use. This capacity allows you to run a shower and a sink at the same time without significant drops in water temperature or pressure.