GASLAND Gasmart E 5.8 GPM Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This gasland gasmart e 5 8 gpm review covers the GASLAND Gasmart E, a propane-powered tankless water heater designed for whole-house use. It delivers up to 5.8 gallons per minute at a peak output of 150,000 BTU. The unit measures 14.3 by 24.7 inches and weighs 33.1 pounds. Its compact, suitcase-sized form factor allows for wall mounting in tight spaces like closets or basements. The model CE528LP is CSA certified for indoor operation. This spec-focused overview helps you decide if the flow rate and fuel type match your home’s plumbing needs.
What stands out
- 150,000 BTU heating capacity for whole-house coverage
- 5.8 GPM flow rate for simultaneous use
- Propane fuel type for indoor installation
- Compact dimensions: 14.3 x 24.7 x 14.3 inches
- CSA certified safety standards for reliable operation
Who it fits
Good fit for
You should consider this unit if you have a propane supply and need continuous hot water for multiple fixtures. The 5.8 GPM rate supports whole-house demands, including showers and laundry. Its small footprint suits homes with limited utility space, such as closets or basements. The indoor design and CSA certification ensure safe operation in residential settings. If you prioritize on-demand hot water without tank storage, this propane model fits your setup.
Who should skip it
Skip this heater if you rely on natural gas instead of propane, as this specific model is designed for propane only. You may also want to look elsewhere if you need higher flow rates, as other variations offer 4.3 GPM or different configurations. If you require outdoor installation, this indoor-only unit is not suitable. Additionally, if you need a natural gas version, check the available variations, as this listing specifies propane fuel type for the 5.8 GPM option.
Verdict: The GASLAND Gasmart E offers a strong 5.8 GPM flow rate for propane users seeking whole-house coverage in a compact package. Its specs make it a practical choice for indoor installation where space is limited.
Key specs explained
150,000 BTU
This is the peak heat output. It determines how much hot water the unit can produce during peak demand. A 150,000 BTU rating supports higher flow rates, such as the listed 5.8 gallons per minute. You should compare this number to other propane models. Higher BTU units generally handle more simultaneous uses, like showers and laundry, without dropping temperature.
Propane
This indicates the fuel source. You must have a propane tank and proper gas lines installed. Propane works well where natural gas is unavailable. It burns cleanly and efficiently. Check your local fuel availability and pricing. Propane units often perform consistently in cold weather compared to electric models, making them suitable for various climates if you have the fuel supply.
5.8 GPM
This is the maximum flow rate. It means the heater can deliver 5.8 gallons of hot water each minute. This capacity suits whole-house needs, allowing multiple fixtures to run. Compare this to lower GPM models if you have a smaller household. If you run a shower and kitchen faucet simultaneously, ensure the total demand stays within this limit for consistent temperature.
Indoor
This specifies the installation location. You must place this unit inside your home, such as a closet or basement. It is not weatherproof for outdoor use. Indoor installation requires proper ventilation and gas line connections. Ensure your space meets local code requirements for indoor gas appliances. This limits where you can mount the unit compared to outdoor-rated models.
14.3 by 24.7 inches
These are the physical dimensions. The unit is compact and wall-mounted. It fits in tight spaces like closets or utility rooms. Compare these measurements to your available wall space. The small footprint saves floor space compared to bulky tank heaters. Ensure you have clearance for maintenance access and proper venting around the unit before purchasing.
Design and build overview
According to the listing, the GASLAND Gasmart E features a compact, suitcase-sized form factor. The unit measures 14.3 inches in width and length, with a height of 24.7 inches. This small footprint allows it to fit into tight spaces such as closets, basements, or laundry rooms. The black finish and wall-mounted layout help it blend into utility areas without taking up valuable floor space. Weighing 33.1 pounds, the unit is light enough for standard mounting but substantial enough to feel secure on a wall.
The design prioritizes space efficiency over bulk. By eliminating a storage tank, the heater avoids the leaks and maintenance issues associated with traditional units. This layout supports year-round reliability and easier maintenance. The compact dimensions mean you can install it in areas where a 50-gallon tank would not fit. The wall-mounted style keeps the unit off the ground, which is essential for the listed freeze protection feature.
You should note that the listing describes this as a durable build with fewer parts. This construction aims for a lifespan twice that of traditional tank heaters. The straightforward design reduces potential failure points. The compact size and light weight make installation simpler, provided you have access to propane gas and proper ventilation for indoor use. The physical dimensions define exactly where it can go in your home.
Setup and everyday use details
The GASLAND Gasmart E is designed for indoor installation, which simplifies your setup process by keeping venting and gas lines within your home structure. You must connect it to a propane fuel source, as this unit is not compatible with natural gas. The listing notes a compact footprint of 14.3 by 14.3 by 24.7 inches, allowing you to mount it in closets or small utility rooms without consuming significant floor space. Its lightweight design at 33.1 pounds makes handling during installation manageable for a single person or a small team. Once installed, the unit operates on demand, meaning you do not need to wait for a storage tank to reheat water. The 150,000 BTU output supports up to 5.8 gallons per minute, enabling you to run multiple fixtures simultaneously, such as a shower and a kitchen sink, without a noticeable drop in temperature. The device includes built-in safety mechanisms like overheat protection and freeze protection, which activate automatically to prevent damage during extreme conditions. You benefit from continuous hot water for laundry, dishes, and bathing without interruption. The unit’s CSA certification indicates it meets specific safety standards for propane operation. Maintenance is straightforward due to the lack of a storage tank that can corrode or leak. You simply ensure the gas line remains secure and the exterior vents are clear of debris. This setup allows for reliable year-round performance in whole-house applications.
Check compatibility and maintenance needs
Before you finalize your choice, verify your propane supply capacity. This unit draws significant gas to maintain 5.8 GPM. Ensure your tank and regulator can handle the load without pressure drops. Check your home’s gas line diameter. The listing specifies indoor installation, so confirm you have proper venting routes and clearance around the 14.3-inch width. You must also review local building codes for whole-house propane heaters. Maintenance involves annual descaling if you have hard water. This prevents mineral buildup in the heat exchanger. Compare this model against other options on this 1-product page. Consider units with higher UEF if energy efficiency is your priority. The Gasmart E offers robust output, but ensure your household’s simultaneous demand matches its 150,000 BTU capacity. If multiple showers run at once, verify the flow rate holds steady. This spec-focused approach ensures the heater fits your specific plumbing setup.
Check before you buy
- Verify propane tank capacity handles peak 150,000 BTU demand
- Confirm gas line diameter supports continuous high flow
- Check local codes for indoor propane installation requirements
- Plan for annual descaling to prevent mineral buildup
The product at a glance
GASLAND Gasmart E 5.8 GPM Indoor Propane Heater
Best for: propane-powered whole-house hot water needs
- Fuel Type
- Propane
- Installation Location
- Indoor
- Use
- Whole House
- BTU
- 150,000 BTU
- Dimensions
- 14.3 × 14.3 × 24.7 inches
- Weight
- 33.1 pounds
View on Amazon: GASLAND Gasmart E 5.8 GPM Indoor Propane Heater Affiliate link
This GASLAND unit delivers up to 5.8 gallons per minute of hot water using propane. It features a 150,000 BTU burner and a compact 14.3 by 24.7 inch footprint. The device carries CSA certification and includes safety protections against overheating and freezing. It suits whole-house needs where propane is the available fuel source. The design prioritizes continuous flow and space efficiency for indoor installation.
Pros
- Delivers up to 5.8 GPM for whole-house use
- High 150,000 BTU output for strong performance
- CSA certified for safety standards
- Compact dimensions save wall space
- Includes freeze and overheat protection
Cons
- Propane fuel limits outdoor or natural gas compatibility
- Indoor installation only restricts placement options
- No digital display or remote control listed
Good fit if
- You need hot water for multiple fixtures simultaneously
- You have a propane supply line available
- You want a compact unit for a closet or basement
Skip if
- You require natural gas connection
- You need an outdoor-rated unit
- You prefer digital temperature controls
Verdict: GASLAND Gasmart E 5.8 GPM Propane Heater provides reliable whole-house flow for propane users. It fits homes needing high output in a small footprint without extra digital features.
Specifications side by side
| Spec | GASLAND Gasmart E 5.8 GPM Indoor Propane Heater |
|---|---|
| Fuel Type | Propane |
| Installation Location | Indoor |
| Use | Whole House |
| BTU | 150,000 BTU |
| Dimensions | 14.3 × 14.3 × 24.7 inches |
| Weight | 33.1 pounds |
| Size | Small |
| Color | Black |
| Model | CE528LP |
Frequently asked questions
Is the GASLAND Gasmart E suitable for whole-house use?
Yes, this unit is designed for whole-house applications. It delivers up to 5.8 gallons per minute of hot water. This flow rate supports multiple simultaneous uses, such as running a shower and kitchen faucet at the same time. The 150,000 BTU output ensures consistent performance for larger households.
What type of fuel does the GASLAND Gasmart E use?
The heater runs exclusively on propane. It is not compatible with natural gas. You must connect the unit to a propane tank or supply line. Ensure your propane infrastructure can handle the 150,000 BTU demand to maintain the rated 5.8 GPM flow rate without pressure drops.
Can I install the GASLAND Gasmart E outdoors?
No, this model is built for indoor installation only. The listing specifies indoor use, which simplifies venting and gas line routing within your home structure. Do not attempt outdoor placement, as the unit lacks the necessary weatherproofing. Indoor installation keeps components protected from rain and temperature extremes.
How big is the GASLAND Gasmart E 5.8 GPM?
The unit has a compact footprint measuring 14.3 inches in width and length. It stands 24.7 inches tall. Weighing 33.1 pounds, it is small enough to fit in tight spaces like utility closets. The suitcase-sized design allows for easy placement in areas with limited square footage.
What is the model number for this propane heater?
The model number is CE528LP. This identifier helps you verify compatibility with your existing propane setup. The LP designation confirms it is the propane-specific version of the Gasmart E series. Use this model number when ordering parts or consulting the manual for installation guidelines.
Does the GASLAND Gasmart E have digital controls?
The provided specifications do not list digital features or a display screen. The unit focuses on reliable mechanical operation rather than extra smart features. You get straightforward propane heating without complex interfaces. This design choice keeps the footprint small and the maintenance requirements simple for whole-house hot water needs.
