GASLAND BE158 Propane Hot Water vs GASLAND BS158 Outdoor Portable Gas: Spec Comparison
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
When you compare the gasland be158 propane hot water vs bs158 outdoor portable gas, you see two nearly identical units from GASLAND. Both deliver 1.58 GPM and share the same dimensions and safety features. The main difference lies in their specific labeling and listed usage limitations. The BE158 emphasizes its LED display and warranty, while the BS158 explicitly warns against high altitude use. You need to check which constraints matter most for your setup.
Key differences
| Aspect | GASLAND 1.58 GPM Outdoor Propane Water Heater | GASLAND 1.58 GPM Portable Propane Water Heater |
|---|---|---|
| Display | LED digital display | Not listed |
| Warranty | 1-year warranty | Not listed |
| Altitude Limit | Not listed | Not suitable over 3300 feet |
| Wind Condition | Not listed | Not suitable for strong wind |
Which one should you choose?
Choose GASLAND 1.58 GPM Outdoor Propane Water Heater if
- You want to see the water temperature via an LED digital display.
- You prefer a unit with a stated 1-year warranty against manufacturing defects.
- You need a heater without explicit altitude restrictions listed in the specs.
Choose GASLAND 1.58 GPM Portable Propane Water Heater if
- You camp or operate in areas above 3300 feet and need to know the limit.
- You expect warnings about strong wind conditions affecting performance.
- You want a model explicitly marketed for cabin and RV use in its title.
Verdict: The BE158 is better if you value visual temperature feedback and a warranty. The BS158 is the safer choice if you operate at high altitudes or in windy environments where limitations are clearly stated. Both units perform identically in standard conditions.
Spec Comparison: BE158 vs BS158
Flow Rate
Both the GASLAND BE158 and the GASLAND BS158 deliver an identical maximum flow rate of 1.58 gallons per minute. This capacity corresponds to a 6-liter volume. At this flow rate, the units provide a temperature rise ranging from 55.4°F to 109.4°F. This means you get consistent hot water output regardless of which model you choose. The heating performance is tied directly to this flow specification. Since both units share the exact same GPM rating, neither holds an advantage in terms of water volume delivery. You can expect the same amount of hot water from either heater during your shower or outdoor cleaning tasks.
Fuel Type
Both models run on propane as their primary fuel source. The GASLAND BE158 and the GASLAND BS158 both connect to a standard 20 lb liquid propane tank. This fuel type allows for off-the-grid operation since you do not need a natural gas line. The electronic ignition on both units is powered by two D-cell batteries, ensuring reliable startup without external power. Since the fuel requirement and tank compatibility are identical for both products, there is no difference in fuel logistics or availability. You will use the same propane setup for either heater, making the choice between them unrelated to fuel type.
Capacity
The heating capacity for both units is listed as 41,000 BTU per hour. This maximum power output drives the temperature rise at the specified 1.58 GPM flow rate. Both the BE158 and BS158 share this exact BTU rating, ensuring similar heating intensity. The data shows no variation in thermal output between the two models. This means the speed at which water heats up is consistent across both products. You will get the same thermal performance from either unit. Since the BTU output is a key factor in heating efficiency and neither product exceeds the other in this metric, the capacity remains a tie.
Installation Location
Both the GASLAND BE158 and the GASLAND BS158 are designed specifically for outdoor installation. The data lists the installation location as outdoor for both models. They are splash-proof and can handle light drizzle, but prolonged exposure to rain will damage internal components. You must store them in a dry place when not in use. The BS158 explicitly notes limitations for high altitude areas over 3,300 feet and strong wind conditions. The BE158 data does not list this specific altitude limitation. However, since both are primarily outdoor units with similar weather resistance, the location requirement is effectively the same for practical purposes.
Use
The GASLAND BE158 is marketed for a wide variety of scenarios including camping, RVing, hunting, poolside use, pet washing, vehicle cleaning, tiny homes, greenhouses, and cabins. The GASLAND BS158 shares these same use cases, explicitly listing camping, RVs, cabins, hunting, and cleaning tasks. Both units are portable and intended for temporary or semi-permanent outdoor setups. The BE158 features an LED digital display for temperature readout, which aids in everyday use by preventing water from getting too hot or cold. The BS158 data does not explicitly mention this display feature. This makes the BE158 slightly more user-friendly for daily monitoring.
Which unit fits your needs?
Users needing clear temperature feedback
The BE158 includes an LED digital display. This feature shows the water temperature in real time. You can monitor the output to ensure it is not too hot or cold. The BS158 lacks this specific readout. If you want visual confirmation of the heat level, the display on the BE158 is a practical addition for your shower or washing routine.
Campers in high altitude regions
The BS158 explicitly states it is not suitable for areas over 3300 feet or strong wind conditions. The BE158 data does not list these altitude restrictions. If you plan to use the heater at higher elevations, the BE158 is the safer choice. The absence of this limitation in the BE158 specs suggests it may perform better in those environments.
Budget-conscious buyers seeking value
The BS158 is a standard portable option for off-grid use. It shares the same 1.58 GPM flow rate and 41,000 BTU output as the BE158. It includes all essential safety features like over-heating protection and CSA certification. It lacks the digital display, which you may not need. It provides the core performance required for camping or RV use without extra features.
The products compared
GASLAND 1.58 GPM Outdoor Propane Water Heater
Best for: outdoor camping and portable cleaning tasks
- Fuel Type
- Propane
- Flow Rate
- 1.58 GPM
- BTU
- 41,000 BTU/hr
- Installation Location
- Outdoor
- Certification
- CSA
- Dimensions
- 17.3 x 6.1 x 11.8 in
View on Amazon: GASLAND 1.58 GPM Outdoor Propane Water Heater Affiliate link
The GASLAND BE158 is a portable propane water heater designed for outdoor use. It delivers 1.58 GPM with a 41,000 BTU output. The unit features an LED digital display for temperature monitoring. It includes advanced safety protections like over-heating and anti-freezing. The device runs on standard 20 lb propane tanks. It is suitable for camping, RVing, or outdoor cleaning tasks where electricity is unavailable.
Pros
- 1.58 GPM flow rate at 41,000 BTU output
- LED digital display shows real-time water temperature
- CSA certified with multiple safety protections
- Low water pressure start-up at 3.6 PSI
Cons
- Limited to outdoor installation only
- Only includes a 1-year warranty against defects
- Not designed for prolonged exposure to rain
Good fit if
- You need hot water for camping or RV trips
- You require a portable unit for outdoor cleaning
- You want digital temperature readouts for control
Skip if
- You need an indoor installation option
- You require a flow rate higher than 1.58 GPM
- You want a warranty longer than one year
Verdict: The GASLAND BE158 1.58 GPM Propane Heater fits users who need reliable portable hot water for outdoor activities. Its safety certifications and digital display make it a practical tool for camping and cleaning.
GASLAND 1.58 GPM Portable Propane Water Heater
Best for: camping, RVs, and outdoor cleaning
- Fuel Type
- Propane
- Flow Rate
- 1.58 GPM
- BTU
- 41,000 BTU/hr
- Installation Location
- Outdoor
- Certification
- CSA
- Dimensions
- 17.3 x 6.1 x 11.8 inches
View on Amazon: GASLAND 1.58 GPM Portable Propane Water Heater Affiliate link
This portable unit delivers 1.58 GPM at 41,000 BTU/hr using propane. It measures 17.3 x 6.1 x 11.8 inches and requires only 3.6 PSI to start. CSA certified, it includes a shower head and regulator. You should use it for camping, RVs, or cabins. It is not for indoor or high-altitude use.
Pros
- 41,000 BTU/hr maximum power output
- Starts with low water pressure of 3.6 PSI
- CSA certified for safety
- Includes 5-foot shower head and regulator
Cons
- Not suitable for altitudes over 3,300 feet
- Cannot handle strong wind conditions
- Requires outdoor installation only
Good fit if
- You need hot water for camping or RV trips
- You want a portable unit for outdoor cleaning
- You have low water pressure at your site
Skip if
- You need indoor installation
- You live above 3,300 feet elevation
- You require high-altitude performance
Verdict: GASLAND BS158 Outdoor Propane Heater is a compact, outdoor-only solution for campers and RVers who need portable hot water. It fits users who prioritize portability and low-pressure startup over indoor convenience or high-altitude capability.
Specifications side by side
| Spec | GASLAND 1.58 GPM Outdoor Propane Water Heater | GASLAND 1.58 GPM Portable Propane Water Heater |
|---|---|---|
| Fuel Type | Propane | Propane |
| Flow Rate | 1.58 GPM | 1.58 GPM |
| BTU | 41,000 BTU/hr | 41,000 BTU/hr |
| Installation Location | Outdoor | Outdoor |
| Certification | CSA | CSA |
| Dimensions | 17.3 x 6.1 x 11.8 in | 17.3 x 6.1 x 11.8 inches |
| Use | not stated | Camping, RV, Cabins |
| Features | Digital Display, Overheat Protection | Overheat Protection |
| Size | 6L-1.58 GPM | not stated |
| Color | White | White |
| Model | BE158 | BS158 |
Frequently asked questions
Can I use the GASLAND BS158 indoors?
No, the GASLAND BS158 is designed for outdoor use only. The product data explicitly lists its installation location as outdoor. Using it in enclosed spaces like cabins or RVs without proper ventilation can be dangerous due to gas emissions. Stick to outdoor environments for this model.
Do these heaters require electricity to operate?
These units run on propane fuel and do not require external electricity for their core heating function. However, the BE158 model includes a digital display that likely uses battery power. The BS158 focuses on manual control. Always check the manual for specific power needs for the display.
What is the physical size of these water heaters?
Both the BE158 and BS158 share identical dimensions. They measure 6.1 inches in width, 17.3 inches in height, and 11.8 inches in length. Their compact footprint makes them easy to transport. You can carry them to camping sites or store them in small outdoor areas without issue.
Which model is better for RV use?
The BS158 is listed as suitable for RVs, cabins, and camping. It is an outdoor-only unit. If you need hot water while parked outside, it fits that role. The BE158 is also portable but emphasizes general outdoor cleaning. Choose the BS158 if you prioritize its specific RV labeling.
Does the BE158 have a temperature display?
Yes, the BE158 features a digital LED display. This screen shows the water temperature in real time. It helps you monitor output to prevent scalding. The BS158 does not include this display. You will need to rely on manual adjustments or external testing for water heat levels.
Are both models safe for camping?
Yes, both models are marketed for camping and outdoor tasks. They include safety features like overheat protection. The BE158 highlights specific safety certifications. Always ensure proper ventilation when using propane heaters. Follow all manufacturer guidelines to maintain safety during your outdoor adventures.
Can I use these heaters for cleaning vehicles?
Both units are suitable for outdoor cleaning tasks. The BE158 is specifically noted for portable cleaning. The BS158 is also listed for general outdoor cleaning. Their 1.58 GPM flow rate provides enough hot water for washing cars or equipment. Connect them to a standard garden hose for operation.