Electrolux Electric Tank Water Heater Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This electrolux electric tank water heater review focuses on the 1.5-gallon under-sink model designed for point-of-use hot water. It measures 10.1 by 12.3 inches and runs on standard 120V power. These two specs define its role: compact size for tight spaces and easy plug-in installation. You get reliable heating without complex wiring or gas lines. The unit includes a 3.6-foot cord, making setup straightforward for DIYers. It targets kitchens, bathrooms, and small workspaces where space is limited. This guide explains how those dimensions and voltage requirements affect your daily use and installation options.
What stands out
- 1.5-gallon capacity for single-fixture point-of-use heating
- 120V plug-in operation with included 3.6 ft cord
- Compact 10.1 x 12.3 inch footprint fits under most sinks
- CSA certified with overheat protection and leak-resistant connections
- 6-year tank warranty and 2-year electrical components warranty
Who it fits
Good fit for
This heater suits you if you need hot water for a single sink in a kitchen, bathroom, office, or RV. The 120V plug-in design works with standard outlets, so you avoid expensive high-voltage installation. Its compact 10.1 by 12.3 inch size fits easily into tight under-sink cabinets. If you want a DIY-friendly setup that delivers reliable hot water without gas lines, this model fits your space and electrical setup. It is ideal for locations where a full-size heater is too large or impractical.
Who should skip it
Skip this unit if you need to supply hot water to multiple fixtures simultaneously. The 1.5-gallon capacity is limited to point-of-use heating for a single sink. You cannot use it for showers or tubs. If your home requires high-volume hot water, this small tank will run out quickly. Also, avoid this if you lack a nearby 120V outlet within 3.6 feet. The short cord limits placement flexibility. For whole-house needs, consider a larger tank or a tankless system instead.
Verdict: This compact 1.5-gallon heater is a practical choice for single-sink hot water needs where space and simple installation matter. It delivers reliable point-of-use heating without complex wiring.
Key specs explained for this unit
Capacity: 1.5 gallons
This volume holds a small amount of hot water for immediate use. It suits single sinks or brief tasks, not whole-house needs. When comparing tankless heaters, note that tankless units provide endless hot water on demand. This mini tank offers quick recovery for low-demand spots, whereas tankless systems require higher flow rates to maintain temperature during continuous use.
Voltage: 120 V
Standard household power powers this unit. You plug it into a regular outlet, avoiding complex wiring. Tankless water heaters often require 240V circuits and dedicated breakers. This 120V rating makes installation simpler for renters or DIYers. It limits heating speed compared to high-voltage tankless models, but ensures compatibility with most existing kitchen or bathroom circuits.
Dimensions: 10.1 x 12.3 inches
These compact measurements allow placement under most sinks. The small footprint fits tight cabinets where larger heaters cannot go. Tankless water heaters are also compact but often require wall mounting. This vertical design maximizes space efficiency in small areas. Check your cabinet depth before buying, as this unit needs specific clearance for proper ventilation and access to the power cord.
Fuel Type: Electric
Electric operation means no gas lines or ventilation are needed. This simplifies installation in homes without natural gas infrastructure. Tankless water heaters come in gas and electric versions. Electric models typically have lower upfront costs but higher energy bills. This unit uses electricity to heat water, offering a safe, clean option for point-of-use applications in kitchens or bathrooms.
Design and Build Details
The unit measures 10.1 by 12.3 inches, a compact footprint that fits under most standard sinks. According to the listing, the durable tank and premium internal components resist corrosion. This construction choice ensures long-lasting performance with minimal heat loss. You get reliable hot water ready when needed, without significant energy waste during standby.
Installation relies on a standard 120V outlet and includes a 3.6-foot power cord. This design allows for simple plug-in setup without special wiring or gas lines. You can complete the DIY installation in minutes. The CSA certification confirms overheat protection and leak-resistant connections. These safety features are engineered to prevent electrical hazards and support dependable daily operation.
The model number is EES015, and it is available in three capacity variations: 1.5, 2.5, and 8 gallons. Height options range from 12.3 to 17.3 inches. This flexibility lets you match the physical layout of your space, whether it is a kitchen, bathroom, office, RV, or garage. The brand notes over 100 years of Swedish innovation. You receive a six-year tank warranty and a two-year warranty on electrical components, supporting long-term reliability.
Setup and everyday use
Installation relies on standard 120V outlets and includes a 3.6 ft power cord. You do not need special wiring or gas lines. The listing describes this as a DIY-friendly setup that takes minutes. You simply plug the unit into a wall socket. This electrical requirement ensures compatibility with most residential kitchens and bathrooms without requiring an electrician for high-voltage work. The compact dimensions of 10.1 by 12.3 inches allow it to fit under most sinks. This size makes it suitable for tight spaces in offices, RVs, food trucks, and garages. Daily use involves drawing from the 1.5-gallon tank. This capacity provides hot water for single sinks or brief tasks. It is not designed for whole-house needs or simultaneous multiple fixtures. The unit maintains water temperature with minimal heat loss due to its insulated tank construction. CSA certification indicates built-in overheat protection. Leak-resistant connections are engineered to prevent electrical hazards. These safety features aim to provide dependable operation during regular use. The durable tank resists corrosion, which supports long-lasting performance. You get consistent hot water output for point-of-use applications. The 6-year tank warranty and 2-year electrical components warranty cover potential defects. This coverage supports long-term reliability for everyday tasks. The design prioritizes ease of use and safety in confined areas.
Before You Buy This Unit
Before you buy, check your outlet. This unit needs a standard 120V socket. You must have one within reach of the 3.6 ft cord. If your sink is far from power, you may need an extension cord. Check local codes for under-sink electrical work. Some areas require licensed electricians. This model holds only 1.5 gallons. It is not for whole-house use. It suits single sinks or small tasks. If you need endless hot water, look at tankless heaters. They provide hot water on demand. This tank model keeps water ready. It loses some heat over time. Insulate the pipes if possible. This reduces heat loss. You get reliable hot water for brief use. It fits in tight spaces. It is easy to install. But it is not a replacement for tankless systems. It is a point-of-use solution. Choose it for convenience. Skip it for high volume.
Check before you buy
- Verify a 120V outlet is near the sink.
- Check if 3.6 ft cord reaches the plug.
- Confirm local codes allow under-sink electrical work.
- Ensure you only need hot water for one sink.
- Consider tankless heaters if you need endless hot water.
The product at a glance
Electrolux 1.5 Gal 120V Under Sink Heater
Best for: single sink hot water needs
- Fuel Type
- Electric
- Capacity
- 1.5 Gallon
- Voltage
- 120V
- Certification
- CSA
- Dimensions
- 10.1 x 12.3 in
- Use
- RV, Under Sink
View on Amazon: Electrolux 1.5 Gal 120V Under Sink Heater Affiliate link
This Electrolux EES015 is a 1.5-gallon electric water heater designed for under-sink installation. It operates on standard 120V power with a 3.6 ft cord, requiring no special wiring. The unit measures 10.1 x 12.3 inches, fitting into tight spaces. It provides point-of-use hot water for kitchens or bathrooms. The compact size and plug-in design make it suitable for small households or specific appliance needs.
Pros
- 1.5-gallon capacity for point-of-use hot water
- Standard 120V plug-in installation with included cord
- Compact 10.1 x 12.3 inch footprint fits under sinks
- CSA certified with overheat protection
Cons
- Small 1.5-gallon capacity limits simultaneous use
- Short 3.6 ft power cord restricts placement
- Electric model requires adequate circuit capacity
Good fit if
- You need hot water for a single sink
- You have a standard 120V outlet nearby
- You have limited space under the counter
Skip if
- You require hot water for multiple fixtures
- You need a higher capacity than 1.5 gallons
- You cannot install it near a standard outlet
Verdict: Electrolux 1.5 Gal 120V Under Sink Heater is a practical solution for single-sink applications where space is tight. It fits buyers who need immediate hot water without complex installation.
Specifications side by side
| Spec | Electrolux 1.5 Gal 120V Under Sink Heater |
|---|---|
| Fuel Type | Electric |
| Capacity | 1.5 Gallon |
| Voltage | 120V |
| Certification | CSA |
| Dimensions | 10.1 x 12.3 in |
| Use | RV, Under Sink |
| Color | 1.5 Gallon |
| Model | EES015 |
Frequently asked questions
Is this Electrolux heater suitable for a whole house?
No, this unit is not designed for whole-house use. It has a 1.5-gallon capacity, which holds a small amount of hot water for immediate tasks. This volume is ideal for single sinks or brief washing. It cannot meet the simultaneous demands of multiple showers or appliances. You should consider a larger tank or a tankless system for full home coverage.
Does it require a gas line for installation?
No, it does not use gas. This model runs on standard 120V electric power. It includes a 3.6-foot power cord that plugs into a wall outlet. You do not need special wiring, gas lines, or professional venting. This makes it a DIY-friendly option for under-sink installation in most kitchens or bathrooms.
What are the physical dimensions of the unit?
The unit measures 10.1 inches in width, 12.3 inches in height, and 10.1 inches in length. These compact dimensions allow it to fit under most standard sinks. The small footprint is designed for tight spaces where larger water heaters cannot fit. Ensure your under-sink area can accommodate these specific measurements before purchasing.
Can I install this heater myself?
Yes, the listing describes this as a DIY-friendly setup. It connects to standard 120V outlets and includes a power cord. You do not need complex plumbing or electrical work. The process typically takes minutes if you have access to an outlet near the sink. Always check local codes for under-sink electrical work.
What is the model number for this heater?
The model number is EES015. This identifier corresponds to the Electrolux 1.5-gallon electric under-sink heater. You can use this number to find replacement parts or verify compatibility with your existing plumbing setup. It helps distinguish this specific 120V unit from other Electrolux water heating products.
Is this heater energy efficient?
This unit is designed for point-of-use efficiency by heating water only where needed. Its small 1.5-gallon tank reduces standby heat loss compared to large central tanks. The durable tank construction helps maintain heat with minimal loss. This makes it a practical choice for reducing energy waste in single-sink applications.
Does it come with a power cord?
Yes, it includes a 3.6-foot power cord. This length allows you to plug the unit directly into a nearby wall outlet. You do not need to purchase a separate cord for standard installations. Ensure your outlet is within reach of this cord length for proper placement under the sink.