Electrolux 8kW Tankless Water Heater Review: Who It Fits and Who Should Skip It
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This electrolux 8kw tankless water heater review focuses on a compact unit designed for under-sink use. It delivers instant hot water at 1.97 GPM with a 77°F temperature rise. The 8kW heating element operates on a 240V circuit. Its small footprint measures 6.9 by 8.1 by 2.5 inches. This model prioritizes efficiency for single-faucet tasks like handwashing and dish rinsing. It does not support high-flow applications such as showers. The unit features CSA certification and IPX4 waterproofing for safety. You get continuous heat without waiting for a tank to preheat. This spec-driven overview helps you decide if it fits your sink setup.
What stands out
- 8kW heating power provides 1.97 GPM at 77°F rise
- Compact 6.9 x 8.1 x 2.5 inch size fits tight under-sink spaces
- 99% heating efficiency reduces energy use for single faucet tasks
- Separated heating element minimizes scale buildup and corrosion
- IPX4 waterproof rating and anti-scald technology ensure safe operation
Who it fits
Good fit for
This unit suits homeowners needing hot water for a single sink, vanity, or bar area. The 1.97 GPM flow rate is ideal for handwashing and dish rinsing. Its compact dimensions fit easily under most standard sinks. If you want to eliminate wait times for warm water at a specific faucet, this electric model delivers. The 240V requirement means you need a dedicated 40A circuit. It is perfect for kitchens, bathrooms, or laundry rooms where space is limited and only one fixture needs heating.
Who should skip it
You should skip this model if you need hot water for showers. The 1.97 GPM flow rate is too low for shower use. The maximum temperature of 104°F may not be sufficient for all shower preferences. This unit is optimized for sinks, not high-demand appliances. If you require simultaneous hot water for multiple fixtures, this single-faucet heater will not meet your needs. Consider a higher wattage model or a whole-house system instead. The 40A circuit requirement also limits installation flexibility in some homes.
Verdict: This tankless heater is a practical choice for single-sink hot water needs. Its compact size and efficient heating make it ideal for under-sink installations.
Key specs explained
Wattage: 8 kW
This power rating determines how quickly the unit heats water. An 8kW element provides enough energy for handwashing and dish rinsing but is not strong enough for showers. You should compare this to larger 11kW or 18kW models if you need higher flow rates for multiple fixtures. This wattage is optimized for single sink applications where moderate hot water volume is sufficient.
Flow Rate: 1.97 GPM
Gallons per minute indicates the volume of hot water delivered. At 1.97 GPM, this unit suits low-demand tasks like washing hands or rinsing dishes. It is not suitable for showers, which typically require higher flow. When shopping, compare this figure against other under-sink units to ensure it meets your specific faucet requirements without overwhelming the heating element.
Dimensions: 6.9 x 8.1 x 2.5 in
These compact measurements allow the heater to fit inside standard under-sink cabinets. The slim profile takes up minimal space compared to traditional tank heaters. You can compare these dimensions to larger whole-house units to understand the size difference. This small footprint is ideal for tight spaces like vanities or kitchen corners where storage is limited.
Voltage: 240 V
This unit requires a dedicated 240-volt electrical circuit, not standard 120V household outlets. You must ensure your home has the correct wiring and a 40A breaker installed. Compare this requirement with 120V models if you lack the necessary electrical infrastructure. Proper installation is critical for safety and performance, so consult an electrician if you are unsure about your setup.
Temperature Control: max 104°F
The maximum output temperature is 104°F, which is safe for skin contact and suitable for cleaning. This limit prevents scalding but may not be hot enough for sanitizing dishes that require higher temperatures. Compare this with units offering higher max temperatures if you need sterilization capabilities. This setting ensures comfortable, safe water for daily handwashing and light cleaning tasks.
Design and Build Quality
The unit measures 6.9 by 8.1 by 2.5 inches and weighs very little. Its compact footprint allows it to fit into tight under-sink cabinets. According to the listing, it takes up 90% less space than traditional tank heaters. This small size is critical for you if you have limited storage or plumbing space in your bathroom or kitchen.
The exterior finish is Pearl White. The shell is flame-retardant, which adds a layer of safety near electrical components. The heating element is separated to minimize scale and corrosion. This design choice means you will likely face less maintenance over time. The unit includes anti-scale protection, which helps maintain performance in areas with hard water.
Controls and connections are straightforward. It uses standard 1/2 inch NPT connections for easy plumbing integration. The listing notes it requires only one dedicated 40A circuit. This simplifies installation for DIY setups. The IPX4 waterproof rating protects the internal electronics from splashes. You can install this unit in damp environments without worry. The compact design and durable materials make it suitable for single-faucet use under sinks.
Setup And Everyday Use
Installation requires a dedicated 40A circuit and 240V power. The unit uses 1/2 inch NPT connections for water lines. Its compact dimensions of 6.9 by 8.1 by 2.5 inches allow it to fit under most standard sinks. You can install it in tight spaces without taking up much room. The listing notes that setup is DIY-friendly, though you should follow local electrical codes.
Daily use is limited to single faucets. The 8kW element provides a flow rate of 1.97 GPM with a 77°F temperature rise. This output is suitable for handwashing and dish rinsing. It is not designed for showers or high-demand fixtures. The maximum water temperature reaches 104°F. You get instant hot water with no preheating delay.
The unit features separated heating elements to minimize scale and corrosion. This design helps maintain performance over time with low maintenance. Safety includes an IPX4 waterproof rating and anti-scald technology. It also has dry-fire prevention and voltage protection. The shell is flame-retardant. You have low-flow protection to prevent damage. A one-year warranty covers defects. Long-term technical support is available. This electric heater saves energy by heating only what you use. It is optimized for vanity use rather than whole-house supply.
Before You Buy This Unit
Before you buy this unit, verify your electrical setup. You need a dedicated 40-amp circuit and 240-volt power. Standard 120-volt outlets will not work. Check your panel capacity to ensure it can handle the load without tripping breakers. The unit uses 1/2-inch NPT connections, so confirm your sink plumbing matches. This model is optimized for single faucets. Do not install it for showers or tubs, as the 1.97 GPM flow rate is too low. It fits well beside larger 11kW or 18kW models if you need whole-house heating. For under-sink use, it saves significant space. Maintenance is minimal due to anti-scale features. However, hard water areas may still require periodic descaling. Ensure your cabinet has enough clearance for the 6.9 by 8.1 by 2.5-inch dimensions. This heater suits remote cabins or small bathrooms where space is tight. It complements larger systems by providing instant heat at specific points.
Check before you buy
- Confirm you have a dedicated 40A circuit and 240V power supply.
- Ensure your sink plumbing uses 1/2-inch NPT connections.
- Verify your electrical panel has enough capacity for the load.
- Check that your cabinet fits the 6.9 by 8.1 by 2.5-inch size.
The product at a glance
Electrolux 8kW Under Sink Tankless Water Heater
Best for: Single sink handwashing and dish rinsing
- Fuel Type
- Electric
- Flow Rate
- 1.97 GPM
- Wattage
- 8 kW
- Voltage
- 240V
- Certification
- CSA
- Dimensions
- 6.9" x 8.1" x 2.5"
View on Amazon: Electrolux 8kW Under Sink Tankless Water Heater Affiliate link
This 8kW electric unit fits under sinks with a compact 6.9 by 8.1 by 2.5 inch frame. It delivers 1.97 GPM at 240V with a 77°F temperature rise, reaching a maximum of 104°F. The separated heating element reduces scale buildup. It is designed for single faucets like handwashing or dish rinsing. It is not suitable for showers.
Pros
- Compact 6.9 x 8.1 x 2.5 inch size saves space
- 1.97 GPM flow rate with 77°F temperature rise
- Separated heating element minimizes scale and corrosion
- IPX4 waterproof rating and six safety protections
Cons
- Maximum temperature limited to 104°F
- Not suitable for shower use
- Requires a dedicated 40A circuit
Good fit if
- You need hot water for a single sink
- You have limited space under the vanity
- You want a compact electric unit
Skip if
- You need hot water for a shower
- You cannot install a 40A dedicated circuit
- You require water hotter than 104°F
Verdict: Electrolux 8kW Electric Under Sink Heater fits single-sink applications where space is tight. It provides stable flow for handwashing but lacks the power for showers.
Specifications side by side
| Spec | Electrolux 8kW Under Sink Tankless Water Heater |
|---|---|
| Fuel Type | Electric |
| Flow Rate | 1.97 GPM |
| Wattage | 8 kW |
| Voltage | 240V |
| Certification | CSA |
| Dimensions | 6.9" x 8.1" x 2.5" |
| Use | Under Sink |
| Features | WiFi |
| Color | Pearl White |
| Model | 8kW |
Frequently asked questions
Can this heater handle a shower?
No. The 8kW rating is insufficient for shower applications. It provides stable flow for handwashing but lacks the power to heat water adequately for bathing. You should choose a larger model if you need hot water for showers.
What electrical circuit is required?
You need a dedicated 40-amp circuit with 240V power. Standard 120-volt outlets will not work for this unit. Verify your panel capacity to ensure it can handle the load without tripping breakers during operation.
How small is the unit?
It measures 6.9 by 8.1 by 2.5 inches. This compact footprint allows it to fit into tight under-sink cabinets. The small size takes up significantly less space than traditional tank heaters, making it ideal for small bathrooms or kitchens.
What water connections does it use?
The unit uses 1/2 inch NPT connections for water lines. This is a standard size for most residential plumbing setups. You can easily connect it to existing pipes under your sink without needing special adapters.
Is it good for dishwashing?
Yes. It is best for single sink handwashing and dish rinsing. The 8kW element provides enough energy to heat water quickly for these tasks. It delivers instant hot water at a flow rate suitable for cleaning dishes by hand.
What color is the heater?
The unit is Pearl White. This neutral color helps it blend in with most bathroom or kitchen decor. It is a standard finish for under-sink appliances, ensuring it remains visually unobtrusive when installed in a cabinet.