Eemax EMT1 1.5-Gallon Mini Tank Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This eemax emt1 1 5 gallon mini tank review focuses on a compact electric water heater designed for point-of-use applications. It holds 1.5 gallons of water, making it suitable for sinks or small appliances where space is tight. The unit measures just 12.50 x 11.00 x 10.00 inches and weighs 13.5 pounds. It runs on 120V power, allowing for simple plug-in installation without complex wiring. You can adjust the temperature from 50°F to 140°F to match your needs. It mounts on walls or floors with 1/2" NPT connections. This model delivers hot water instantly for single-fixture use.
What stands out
- 1.5-gallon capacity fits under sinks
- 120V plug-in installation
- Adjustable 50°F to 140°F thermostat
- Wall or floor mountable design
- Compact 12.50 x 11.00 x 10.00 inch footprint
Who it fits
Good fit for
You should consider this unit if you need hot water for a single sink, bathroom, or office kitchenette. Its 120V electrical requirement means you can likely install it yourself using a standard outlet. The small 1.5-gallon tank saves space in tight cabinets or under counters. If your daily hot water demand is low and you want to avoid the complexity of a large central heater, this compact electric model is a practical choice. It is ideal for remote locations or additions where extending plumbing from a main heater is difficult.
Who should skip it
You should look at another option if you need to supply hot water to multiple fixtures simultaneously. A 1.5-gallon tank will run out quickly during long showers or heavy dishwasher cycles. This unit is not designed for whole-house heating or high-demand scenarios. If you require a higher flow rate or larger storage volume, this mini tank will struggle to keep up. It is also not suitable for areas where 120V power is unavailable, as it does not support 240V connections.
Verdict: This mini tank is a solid choice for low-demand, single-fixture applications where space and easy installation matter. It delivers reliable hot water for sinks and small appliances without taking up much room.
Key specs explained
Capacity: 1.5-Gallon
This volume holds a small amount of hot water. It suits single sinks or small appliances where space is limited. Unlike tankless heaters that provide endless flow, this unit stores water. You get a fixed supply before it reheats. This model is best for low-demand spots. It does not replace whole-house systems. Check your daily hot water needs to ensure this capacity meets your usage requirements.
Voltage: 120V
This voltage allows direct connection to standard household outlets. You do not need special wiring or breakers. Installation is simpler than higher-voltage models. This feature supports easy setup in kitchens or bathrooms. Tankless units often require dedicated circuits. This mini tank offers a plug-and-play option. Verify your local outlet type before purchasing. It ensures compatibility with existing home electrical infrastructure without upgrades.
Temperature Control: 50°F to 140°F
This range lets you adjust water heat levels. Lower settings save energy and reduce scald risk. Higher settings provide hotter water for cleaning. You can tailor output to specific tasks. Tankless heaters often have wider ranges. This feature offers flexibility for different uses. Set it based on your comfort and safety needs. Regular adjustments help optimize performance for your specific household requirements.
Dimensions: 12.50 x 11.00 x 10.00 inches
These measurements indicate a compact footprint. The unit fits under sinks or in tight corners. It saves floor space compared to larger tanks. Tankless heaters vary in size. This model is designed for point-of-use locations. Measure your installation area before buying. Ensure adequate clearance for connections and airflow. The small size makes it ideal for limited spaces in homes or offices.
Installation Location: Wall and floor mountable
This flexibility allows placement in various spots. You can mount it on walls or place it on the floor. This option suits different room layouts. Tankless units are often wall-mounted. This model offers more positioning choices. It helps optimize space in utility areas. Choose the method that best fits your setup. Secure mounting ensures safety and stability during operation.
Design and Build Overview
According to the listing, the Eemax EMT1 features a compact white exterior that fits neatly into tight spaces. The dimensions are 12.50 x 11.00 x 10.00 inches. This small footprint allows for installation under sinks or in cabinets where larger units would not fit. The unit weighs 13.5 pounds. This light weight makes it easy to handle during wall or floor mounting. You can secure it in various locations without needing heavy-duty support structures.
The finish is a standard white coating. This design choice helps the unit blend into most residential decor, whether it is placed in a kitchen or bathroom. The model number is EMT1. It uses electric heating elements powered by a standard 120V outlet. This voltage requirement means you can plug it into a regular household circuit. You do not need special electrical infrastructure for basic operation.
Controls include an adjustable temperature range from 50°F to 140°F. This dial lets you set the water heat level to match your needs. The connections are 1/2" NPT. This standard pipe size ensures compatibility with common residential plumbing fixtures. The layout is simple and functional. There are no complex digital displays or extra features. The design prioritizes straightforward installation and reliable point-of-use heating for small areas.
Setup and everyday use guide
Installation is straightforward because the Eemax EMT1 plugs into a standard 120V outlet. You do not need complex electrical work. The unit features 1/2" NPT connections for your plumbing lines. This standard size fits most residential sink setups. You can mount it on a wall or place it on the floor. Its compact dimensions of 12.50 x 11.00 x 10.00 inches allow it to fit under most sinks. The white exterior blends in with typical cabinetry. Daily use begins when you turn on the hot water tap. The heater activates to warm the stored water. You can adjust the temperature from 50°F to 140°F. This range lets you set the output to your preference. Lower settings save energy, while higher settings provide hotter water for washing. Since it is a point-of-use unit, the water heats instantly as it passes through or is drawn from the small tank. This design reduces wait times at the sink. The 1.5-gallon capacity means you have a limited supply of hot water. It is ideal for hand washing or brushing teeth. If you run out, the unit reheats the remaining water. This cycle repeats as needed. The electric fuel type ensures clean operation without exhaust vents. You simply plug it in and connect the water lines. The adjustable thermostat allows you to control the heat output precisely. This makes it easy to maintain a consistent temperature for your specific needs. The setup process is quick, and daily operation is simple. You get hot water on demand for small tasks.
Before You Buy This Mini Tank
Since this unit stores only 1.5 gallons, it serves single sinks well. You should verify your electrical circuit can handle the load. The 120V plug simplifies setup, but you must ensure the outlet is grounded and nearby. Check your plumbing connections. The 1/2" NPT fittings match most standard residential lines. If your pipes differ, you may need adapters. This heater suits tight spaces under sinks or in cabinets. It is not a whole-house solution. For higher demand, you might need a larger tank or a tankless system. Compare this against the 1 other options on the page. If you need continuous hot water for showers, this mini tank will run out quickly. It reheats slowly. Plan your usage around the recovery time. Keep the area clear for airflow. The white exterior blends into most utility areas. No app or remote is listed, so you adjust temperature manually at the unit. This direct control is simple but requires physical access.
Check before you buy
- Confirm your 120V outlet is grounded and accessible.
- Check if your plumbing uses 1/2" NPT fittings.
- Ensure the space allows for wall or floor mounting.
- Verify this capacity meets your single-sink hot water needs.
The product at a glance
Eemax 1.5-Gallon Mini Tank Electric Water Heater
Best for: single sink point-of-use heating
- Fuel Type
- Electric
- Installation Location
- Wall and floor mountable
- Capacity
- 1.5-Gallon
- Voltage
- 120V
- Temperature Control
- 50°F to 140°F
- Dimensions
- 12.50 x 11.00 x 10.00 inches
View on Amazon: Eemax 1.5-Gallon Mini Tank Electric Water Heater Affiliate link
This Eemax EMT1 is a 1.5-gallon electric water heater designed for point-of-use installation under a sink. It features a 120V plug for easy connection and an adjustable thermostat ranging from 50°F to 140°F. The compact unit measures 12.5 by 11 by 10 inches and weighs 13.5 pounds. You can mount it on a wall or place it on the floor. It suits small spaces needing instant hot water.
Pros
- 120V plug-in installation
- Adjustable temperature from 50°F to 140°F
- Wall or floor mountable
- Compact 12.5 x 11 x 10 inch size
Cons
- Small 1.5-gallon capacity limits simultaneous use
- Requires 120V outlet which may not be near all sinks
- No remote temperature control included
Good fit if
- You need hot water for a single sink
- You want a plug-in installation without hardwiring
- You have limited space under the cabinet
Skip if
- You need to run multiple fixtures at once
- You require a high-flow shower heater
- You only have 240V outlets available
Verdict: Eemax 1.5-Gallon Electric Mini Tank provides reliable hot water for single-sink applications. It fits buyers who need a compact, plug-in solution for under-sink heating.
Specifications side by side
| Spec | Eemax 1.5-Gallon Mini Tank Electric Water Heater |
|---|---|
| Fuel Type | Electric |
| Installation Location | Wall and floor mountable |
| Capacity | 1.5-Gallon |
| Voltage | 120V |
| Temperature Control | 50°F to 140°F |
| Dimensions | 12.50 x 11.00 x 10.00 inches |
| Weight | 13.5 pounds |
| Size | 12.50 x 11.00 x 10.00 inches |
| Color | White |
| Model | EMT1 |
Frequently asked questions
Is the Eemax EMT1 good for a bathroom sink?
Yes, it is designed for single sink point-of-use heating. The 1.5-gallon capacity provides a limited but sufficient supply for hand washing or brushing teeth. Its compact size fits easily under most bathroom vanities, making it a practical choice for small spaces.
What are the exact dimensions of this mini tank?
The unit measures 12.50 x 11.00 x 10.00 inches. Specifically, it is 12.5 inches high, 11 inches wide, and 10 inches long. These small dimensions allow it to fit into tight cabinets or under sinks where larger water heaters would not fit.
Does this heater require a special electrical outlet?
No, it plugs into a standard 120V outlet. This simplifies installation as you do not need complex electrical work or dedicated high-voltage circuits. Just ensure the outlet is grounded and located nearby, as the unit is electric and requires power to heat the water.
How heavy is the Eemax EMT1 when installed?
The unit weighs 13.5 pounds. This lightweight design makes it easy to handle during installation and mounting. You can securely attach it to wall studs or place it on a stable surface under a sink without worrying about excessive weight bearing on the cabinet.
What type of fuel does this water heater use?
It uses electric power. The heating element is powered by standard household electricity. This makes it suitable for locations where gas lines are not available. You simply connect it to a standard electrical outlet to begin heating water for your sink or small appliance.
Can I install this unit myself?
Yes, installation is straightforward for basic DIY skills. It features 1/2 NPT connections that fit most residential sink plumbing. Since it plugs into a standard outlet, you avoid complex electrical wiring. Just connect the water lines and plug it in for immediate use.