Eemax EEM24013 Electric Tankless Water Heater Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This eemax eem24013 electric tankless water review covers a compact unit designed for point-of-use applications. The EEM24013 is an electric tankless water heater that delivers instant, consistent, and endless hot water. Its defining specs are its small footprint and self-modulating technology. The unit measures just 8 inches wide, 3.75 inches high, and 11.5 inches long. This allows it to save valuable storage space in tight areas. The self-modulating feature adjusts energy input based on demand. Before purchasing, you must verify this size meets your specific hot water needs. It is built for efficiency and space conservation in residential settings.
What stands out
- Electric fuel type for clean operation
- Compact dimensions of 8 x 3.75 x 11.5 inches
- Self-modulating technology adjusts energy input
- Provides instant and endless hot water
Who it fits
Good fit for
This heater suits you if you need hot water for a single sink or small appliance in a tight space. The compact size fits easily under counters or in closets. The self-modulating technology ensures you only use the energy required for your specific demand. It is ideal for bathrooms, home offices, or remote kitchens where space is limited and only one fixture is active at a time. You benefit from endless hot water without the bulk of a traditional tank.
Who should skip it
You should skip this model if you need to supply hot water to multiple fixtures simultaneously. The small size and electric power rating may not handle high flow rates for showers or multiple sinks. If your household requires high-volume hot water for whole-house use, this unit is likely underpowered. You must verify your flow rate requirements before buying. This is a point-of-use solution, not a whole-home system. Check your electrical capacity and water usage needs carefully.
Verdict: The Eemax EEM24013 is a space-saving electric tankless heater ideal for single-fixture point-of-use applications. Its compact size and self-modulating technology make it a practical choice for tight spaces.
Key specs explained for Eemax EEM24013
Fuel Type: Electric
This unit uses electricity to heat water rather than gas. You need a compatible electrical circuit in your home, typically a dedicated breaker. This makes installation easier in locations without gas lines. It also avoids combustion risks and venting requirements. Check your home’s electrical capacity before buying to ensure the wiring can handle the load safely and efficiently for your hot water needs.
Dimensions: 3.75 x 8 x 11.5 inches
These compact measurements allow the heater to fit in tight spaces under sinks or in small closets. You save valuable storage area compared to traditional tank models. The small footprint is ideal for point-of-use installations where space is limited. Measure your available area carefully to ensure this unit fits without blocking access to other utilities or requiring structural modifications to your home layout.
Width: 8 inches
The eight-inch width defines how much wall space the unit occupies horizontally. This slim profile helps it blend into narrow cabinets or tight corners. You can install it in areas where wider units would not fit. When comparing models, check this dimension against your available clearance. A narrow width ensures the heater does not protrude excessively, maintaining a clean look and easy access for maintenance tasks.
Height: 3.75 inches
This low height allows the unit to sit comfortably on shelves or mounts in low-ceiling spaces. You can place it in tight areas without worrying about vertical clearance. This dimension is crucial for under-sink installations where headroom is restricted. Compare this height with other compact heaters to find one that fits your specific cabinet depth and height constraints for a seamless integration into your home.
Length: 11.5 inches
The eleven-and-a-half-inch length determines the vertical or horizontal span depending on installation orientation. This moderate length balances capacity with space efficiency. You get enough internal components for effective heating without taking up excessive room. When planning your layout, measure the available space along this axis. This dimension ensures the unit fits within standard cabinetry or wall mounts without requiring custom modifications to your existing infrastructure.
Design and Build Details
The Eemax EEM24013 is a compact electric tankless water heater designed for point-of-use installations. According to the listing, the unit measures 3.75 inches in height, 8 inches in width, and 11.5 inches in length. These dimensions create a small footprint that saves valuable storage space. You can mount this unit in tight areas where a traditional tank would not fit. The blue color is listed as the finish for the exterior casing. This specific size helps you determine if the heater fits your available wall space or cabinet area before purchase.
The device uses self-modulating technology to adjust energy input based on hot water demand. This feature means the unit heats only the water you need when you need it. You get instant, consistent, and endless hot water without wasting energy on reheating stored water. The electric fuel type requires a compatible electrical circuit, typically a dedicated breaker. This setup avoids the need for gas lines or combustion vents. You should verify that this EEM24013 model is the correct size for your specific hot water needs before buying. The compact design and electric operation make it suitable for under-sink or remote bathroom installations where space is limited.
Setup and Daily Use Guide
Setting up the Eemax EEM24013 requires careful planning before installation. The listing explicitly advises you to verify that this specific model matches your hot water needs. This is crucial because the unit is designed for point-of-use applications. Its compact dimensions of 3.75 by 8 by 11.5 inches allow it to fit in tight spaces, saving valuable storage area. However, the small size means it may not serve whole-house demands. You must ensure your electrical circuit can support the unit. Since it is an electric tankless heater, you need a compatible power source, likely a dedicated breaker. The installation process involves connecting the unit to this electrical supply and the water lines. Once set up, daily use is straightforward. The unit provides instant, consistent, and endless hot water. It uses advanced self-modulating technology. This feature adjusts the energy input based on your actual demand. You do not need to manually adjust settings for different flow rates. The system handles the modulation automatically. This means you get hot water only when you need it, reducing waste. The blue casing is a visual detail, but the performance relies on the internal components. You simply turn on the tap, and the unit activates. The self-modulating tech ensures efficiency by heating only the water required. This setup is ideal for sinks or showers where space is limited. Just remember to confirm the capacity matches your usage before finalizing the installation.
Before You Buy This Heater
Owning this Eemax EEM24013 requires specific electrical preparation. You must verify your home has the correct circuit capacity. This unit draws significant power to heat water instantly. Ensure your wiring and breaker box can handle the load without tripping. Installation should follow local codes strictly. Professional help is often wise for electrical connections. Routine upkeep is minimal. You should periodically check for leaks at connections. Inspect the unit for any signs of wear. This compact heater fits well alongside other tankless options in 1 models. It suits small sinks or showers where space is tight. It does not replace whole-house systems. If you need hot water for multiple fixtures simultaneously, this single unit may fall short. Consider pairing it with other models for larger demands. The self-modulating technology helps efficiency, but only if sized correctly for your flow rate. Always confirm the flow requirements match your daily usage patterns before finalizing your purchase.
Check before you buy
- Verify electrical circuit capacity matches unit requirements.
- Confirm flow rate needs for your specific sink.
- Check local codes for point-of-use installations.
- Ensure adequate space for 3.75 by 8 by 11.5 inch unit.
The product at a glance
Eemax Compact Electric Tankless Water Heater
Best for: single sink point-of-use installation
- Fuel Type
- Electric
- Dimensions
- 3.75 x 8 x 11.5 inches
View on Amazon: Eemax Compact Electric Tankless Water Heater Affiliate link
The Eemax EEM24013 is a compact electric tankless water heater designed for point-of-use applications. It measures 11.5 inches long, 8 inches wide, and 3.75 inches high. The unit uses self-modulating technology to adjust energy input based on demand. This ensures instant and endless hot water. Its small footprint saves storage space. You should verify this size fits your specific hot water needs before purchasing.
Pros
- Self-modulating technology adjusts energy input based on demand
- Compact dimensions of 11.5 x 8 x 3.75 inches
- Provides instant and endless hot water
- Electric fuel type
Cons
- Very small physical size limits flow rate
- Electric model requires sufficient circuit capacity
- No included installation hardware listed
Good fit if
- You need hot water for a single sink
- You have limited space for installation
- You want a point-of-use solution
Skip if
- You need to heat water for multiple fixtures
- You require a whole-house heating solution
- You do not have adequate electrical wiring
Verdict: Eemax Electric Tankless Heater is a compact point-of-use unit for single sinks. It fits small spaces and delivers instant hot water. It does not support high-flow household needs.
Specifications side by side
| Spec | Eemax Compact Electric Tankless Water Heater |
|---|---|
| Fuel Type | Electric |
| Dimensions | 3.75 x 8 x 11.5 inches |
| Color | Blue |
| Model | EEM24013 |
Frequently asked questions
What is the best use case for the Eemax EEM24013?
This unit is designed specifically for single sink point-of-use installations. It fits small spaces and delivers instant hot water for one faucet. It does not support high-flow household needs. You should not install this for showers or multiple sinks. It is ideal for remote bathrooms or utility sinks where a dedicated hot water line is unnecessary.
How big is the Eemax EEM24013?
The unit has a compact footprint measuring 8 inches in width, 3.75 inches in height, and 11.5 inches in length. These small dimensions allow it to fit in tight spaces under sinks. The blue casing is slim enough to be mounted discreetly. This size makes it suitable for locations where standard water heaters cannot fit.
Does the Eemax EEM24013 use gas or electricity?
This model uses electricity as its fuel type. It heats water using electric resistance elements rather than gas combustion. You need a compatible electrical circuit in your home, typically a dedicated breaker. This eliminates the need for gas lines or venting. It is safer for indoor installation in areas without gas infrastructure.
Can this heater run a shower?
No, this unit is not designed for shower use. It is a point-of-use heater for single sinks only. It cannot deliver the high flow rates required for showering. If you need hot water for a shower, you should look for a whole-house unit. This compact model is strictly for low-flow applications like handwashing or dishwashing.
What model number is this blue tankless heater?
The model number for this blue unit is EEM24013. It is part of the Eemax Compact Electric Tankless Water Heater line. The blue color helps identify the specific casing design. You can use this model number to verify compatibility with your electrical setup and installation requirements before purchasing.
Is the Eemax EEM24013 a whole-house heater?
No, it is not a whole-house heater. It is a compact point-of-use unit for single sinks. It delivers instant hot water for one specific fixture. It does not support high-flow household needs. You should install one unit per sink if you need hot water in multiple locations throughout your home.