Camplux Enjoy Outdoor LIFE CAMPLUX Tankless Electric Water Review: Specs, Pros and Cons
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
In this camplux enjoy outdoor life camplux tankless electric water review, we look at the Camplux 18kW Electric Tankless Water Heater. This unit delivers on-demand hot water using 18kW of power at 240V. It features a digital display for clear temperature monitoring. The device heats water in under three seconds, offering endless supply. Its compact design saves wall space compared to traditional tank models. You get stable output with safety protections like anti-dry heating. This spec-focused guide explains how these details fit your home setup.
What stands out
- 18kW heating element provides rapid hot water delivery
- Digital display shows precise temperature settings
- ETL certification ensures electrical safety standards
- Compact size measures 17.12 x 13.12 x 3.12 inches
- 99.8% efficiency reduces water heating costs
Who it fits
Good fit for
This heater suits homeowners with adequate electrical infrastructure. You need two double-pole 40AMP breakers and 8AWG wire for proper installation. It works well for whole-house applications where space is limited. The 240V requirement means it fits standard residential electrical systems. If you want instant hot water without waiting, this model delivers. The wall-mount design helps save floor space in utility areas.
Who should skip it
Look elsewhere if your home lacks the necessary electrical capacity. This unit requires specific 40AMP breakers and heavy-gauge wiring. Renters or those unable to upgrade panels should skip it. The 240V requirement excludes many older homes with only 120V outlets. If you need a portable solution, this wall-mounted unit is not suitable. Those wanting 120V compatibility should choose a lower wattage alternative.
Verdict: The Camplux 18kW Electric Tankless Water Heater offers efficient, on-demand hot water for homes with compatible electrical systems. Its compact design and digital controls make it a practical choice for space-conscious households.
Key specs explained
Wattage: 18kW
This power rating determines how quickly the unit heats water. An 18kW system provides high output, suitable for whole-house use or multiple simultaneous fixtures. You get faster recovery than lower-power models. Compare this wattage to smaller 8kW or 11kW units if you have limited electrical capacity or only need one point of use.
Voltage: 240V
The unit requires a dedicated 240-volt circuit, similar to a large dryer or oven. You must install two double-pole 40-amp breakers and use 8AWG wire. This ensures safe operation and full power delivery. Do not attempt to connect this to standard 120V outlets, as it will not function correctly or safely.
Dimensions: 17.12 x 13.12 x 3.12 inches
These compact measurements allow wall mounting in tight spaces without taking up floor area. The slim depth saves room in utility closets or under sinks. Measure your installation spot carefully before buying. This size is smaller than many traditional tank heaters, making it ideal for space-constrained homes or RVs.
Temperature Control: 80°F to 140°F
This range lets you adjust water heat from warm to very hot. You can set lower temperatures to save energy or higher settings for showers. The digital display helps you find the exact comfort level. Check local codes for maximum allowable temperatures to ensure your setting complies with safety regulations.
Certification: ETL
ETL certification means the unit meets specific North American safety standards. It has been tested for electrical hazards and fire risks. This provides peace of mind regarding installation safety. Look for similar certifications like UL or CSA when comparing other tankless heaters to ensure you are buying a compliant product.
Design and build specs
According to the listing, the Camplux 18kW unit measures 17.1 inches in height, 13.1 inches in width, and 3.1 inches in depth. It weighs 17.5 pounds. The casing is white. This slim profile allows you to mount it on a wall without taking up much floor space. You can place it in a central location for whole-house use. The compact size saves room compared to traditional tank-style heaters.
The control panel includes a digital display. You can see the water temperature clearly. The unit offers a temperature range from 80°F to 140°F. A knob allows you to adjust settings. It rotates 360° without needing a reset. This layout lets you change the temperature easily from different angles. The digital interface provides precise monitoring of your hot water output.
The device is built for electric operation at 240V. It requires specific wiring, including 2 x 8AWG wire gauge. The water connection uses a 3/4" NPT fitting. The unit carries ETL certification. This suggests it meets specific safety standards for overheating and anti-dry heating protection. The design focuses on wall mounting and direct electrical connection. You do not need to worry about gas lines or venting. The build supports efficient on-demand heating for showers and sinks.
Setup and daily use guide
Setting up this unit requires a dedicated 240V electrical circuit. You need two double-pole 40-amp breakers to handle the 18kW load. The manufacturer specifies 8AWG wire gauge for safe operation. Ensure your plumbing connections match the 3/4-inch NPT water inlet and outlet ports. The unit measures 17.1 by 13.1 by 3.1 inches, allowing wall mounting in a central location to save space. It weighs 17.5 pounds, so use appropriate anchors for secure installation.
Daily operation begins with water flow. The heater activates automatically when flow reaches 0.66 gallons per minute. You do not need to wait for ignition or pre-heating. Hot water is available in under three seconds. The digital display shows the current temperature. You can adjust the output between 80°F and 140°F using the control knob. The knob rotates 360 degrees without resetting, letting you fine-tune the heat level easily.
Safety features engage during use. The system includes overheating protection and anti-dry heating safeguards. Water and electricity remain separated inside the unit. It meets ETL certification standards for home safety. The heating rod operates at 99.8% efficiency. This design reduces energy waste during your shower or sink use. You get consistent water temperature without manual adjustments. The unit supports multi-point supply for whole-house hot water needs. Maintenance is minimal, with a two-year parts warranty and three-year leak-free coverage provided by the manufacturer.
Before you buy this unit
This Camplux 18kW model requires significant electrical infrastructure. You must install two double-pole 40-amp breakers and use 8AWG wire gauge. Verify your panel has space for these dedicated circuits before purchasing. The unit needs a minimum flow of 0.66 GPM to activate. If your fixtures restrict flow below this threshold, the heater will not turn on. Ensure your plumbing uses 3/4-inch NPT connections for proper fit. The digital display allows precise temperature control between 80°F and 140°F. You can adjust settings via a rotating knob. This unit is ETL certified for safety. It offers a slim profile that saves wall space compared to bulky traditional tanks. Consider if your household’s simultaneous hot water demands match its 18kW output. Other options in this guide may offer lower wattage for single-station use. Check if your existing electrical service can support this load without upgrading your main panel.
Check before you buy
- Confirm you have two 40-amp double-pole breakers available.
- Verify your wiring supports 8AWG gauge for safety.
- Ensure plumbing connections match the 3/4-inch NPT standard.
- Check that water flow exceeds the 0.66 GPM minimum.
The product at a glance
Camplux 18kW Electric Tankless Water Heater
Best for: Whole-house electric hot water needs
- Fuel Type
- Electric
- Wattage
- 18kW
- Voltage
- 240V
- Temperature Control
- 80°F to 140°F
- Certification
- ETL
- Dimensions
- 17.12 x 13.12 x 3.12 inches
View on Amazon: Camplux 18kW Electric Tankless Water Heater Affiliate link
The Camplux TEW18 is a 18kW, 240V electric tankless water heater designed for whole-house use. It heats water in under three seconds with 99.8% efficiency. The unit features a digital display and a 360-degree rotating knob for temperature adjustment. It maintains output between 80°F and 140°F. The compact size saves space, and it requires a 40-amp breaker for installation.
Pros
- 18kW power output for fast heating
- 99.8% energy efficiency rating
- Digital display with 360-degree rotating knob
- ETL certified for safety
- Compact wall-mount design
Cons
- Requires 240V power and 40-amp breakers
- Limited temperature range up to 140°F
- No remote control included
Good fit if
- You need a whole-house electric solution
- You have 240V electrical capacity
- You want a compact wall-mounted unit
Skip if
- You only have 120V outlets
- You need temperatures above 140°F
- You require a gas fuel source
Verdict: Camplux TEW18 18kW Electric Tankless Water Heater fits homes with 240V wiring that need efficient, space-saving hot water. It delivers steady heat for showers and sinks without the bulk of a tank.
Specifications side by side
| Spec | Camplux 18kW Electric Tankless Water Heater |
|---|---|
| Fuel Type | Electric |
| Wattage | 18kW |
| Voltage | 240V |
| Temperature Control | 80°F to 140°F |
| Certification | ETL |
| Dimensions | 17.12 x 13.12 x 3.12 inches |
| Use | Whole House |
| Features | Digital Display |
| Weight | 17.5 pounds |
| Size | 240V/18kW |
| Color | White |
| Model | TEW18 |
Frequently asked questions
Can this heater run on 120V power?
No, it requires a 240V electrical supply. The unit is rated for 18kW at 240V only. You cannot use standard 120V outlets. Ensure your home has the correct voltage before installation to avoid damage or poor performance.
Is the digital display easy to read?
Yes, the unit includes a digital display for temperature monitoring. This feature lets you see the exact water output temperature. It helps you adjust settings for consistent comfort without guessing the heat level during use.
How much space does the unit take up?
It measures 17.1 inches in height, 13.1 inches in width, and 13.1 inches in length. The compact design fits into tight spaces. You can mount it on a wall to save floor space in your utility area.
What is the weight of the Camplux TEW18?
The unit weighs 17.5 pounds. This weight allows for secure wall mounting. Ensure your wall anchors can support this load. The white casing keeps the look clean and unobtrusive in most utility rooms or garages.
Does it work for whole-house hot water?
Yes, it is designed for whole-house use. The 18kW output provides steady heat for multiple fixtures. It delivers on-demand hot water for showers and sinks. This makes it suitable for homes with adequate electrical infrastructure.
What color is the outer casing?
The casing is white. This neutral color blends with most utility spaces. It helps the unit stay visually unobtrusive when mounted on a wall. The finish is durable for indoor or covered outdoor installation.